PDA

View Full Version : It's Christmas in June


MarketPlayer
06-07-2002, 12:03 PM
Sykikchimp,
I found two hatches that were in great shape. &nbsp;One is black off of a 1990. &nbsp;It has the wiper, but unfortunatly &nbsp;for you it has the stock spoiler on it (you know the foamy one). &nbsp;Well it is in great shape, no rust what so ever even were the spoiler attaches to the trunk! &nbsp;There is one spot under the hatch inside the fabric there was a scratch or something in the paint, and it has a little surface rust, but no holes or anything detrimental! &nbsp;They want $250 for it, but i think if i go in there and say i only have $200 they will take it! &nbsp;There is another hatch which is dark grey from a 89, w/ what looks like the 180sx spoiler on it, and is in excelent shape, except the window was busted out by some fuckhead teenager! &nbsp;The dude in charge said they busted like ten other cars windoows just for fun! <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/crazy.gif" border="0" valign="absmiddle" alt=':crazy:'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/crazy.gif" border="0" valign="absmiddle" alt=':crazy:'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/crazy.gif" border="0" valign="absmiddle" alt=':crazy:'> &nbsp; He said he will sell it for $100! &nbsp;I think i am going to buy this one in a few months, unless you want it. &nbsp;But i will reiderate this one more time...The black hatch is in great shape, and is worth the $250.

Aricanderson,
I looked at seven different 240's today and couldn't find a single good coollant reservoir! &nbsp;I did manage to get the ignition trim piece, and the hood prop plastic piece for free! &nbsp;I will mail these pieces out to you once you give me an adress. &nbsp;If you feel inclined you can reimburse me for shipping, but it shouldn't be more than like two stamps! &nbsp;Lucky you!

YellowBulbs,
I asked about the J30 LSD, and they said a 1993+ will work, even though you stated 95+. &nbsp;They only have a 1993 and quoted me $500 <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wow.gif" border="0" valign="absmiddle" alt=':0'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wow.gif" border="0" valign="absmiddle" alt=':0'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wow.gif" border="0" valign="absmiddle" alt=':0'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wow.gif" border="0" valign="absmiddle" alt=':0'> &nbsp; It was the one right next to J&B used auto parts. &nbsp;If The guy who pulls the parts looks like a crazy man then you have found the right place!

Halo,
I have found a few 240s w/ moonroofs, and i can get the rubber for you, but i lost my screw driver so i couldn't pull it for you! &nbsp;I was a dumbass and didn't ask how much, so tell me a price you don't want to go higher than and i will try and wheel and deal for ya! &nbsp;I did mamage to get the headlight connectors fron a 1990 so i hope it will work for you! &nbsp;I got the wires from the head light connector to the plastic joint piece, so you don't have to splice wires or anything! &nbsp;They wanted $20 for it but i got them down to $15 <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'> Once again the dumbass kicked in and didn't ask for the Idle control solenoid, but i am sure i can find it on one of the S13's! &nbsp;Tell me a price an i will haggle w/ them!

Hottdogg,
I asked about the S14 a/c condensor but no one had it! &nbsp;and the S14 was pretty fucked up in the front so the side markers were damaged!

I asked about Z32 throttle bodies but no one had them, and a 1996 differential w/ 36K miles was quoted at $600! &nbsp;Is this a good price?

If anyone has anymore requests for parts, then give me a reply w/ this information for my convenience...
part discription
price willing to pay
type of payment
when you need it

-zac

DarkRaptor42
06-07-2002, 12:07 PM
Need the engine wring harness from a 97-98!!! Bad!

bing
06-07-2002, 12:11 PM
front lower valance of an 89-90

MarketPlayer
06-07-2002, 03:06 PM
</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (bing @ June 07 2002,1:11)</td></tr><tr><td id="QUOTE">front lower valance of an 89-90</td></tr></table><span id='postcolor'>
Is that the same thing as a front lip? &nbsp;I can get a lip from a 1990 but it has a few cracks!

blink0r
06-07-2002, 06:49 PM
1991 240...

aftermarket:
spoiler (color doesn't matter, will be repainted)
strut bar(s) (front, rear or both)
intake (injen, or aem)

if you can find anything... which is doubtful let me know, i'll send cash/money order. Thanks!

nissan_s14
06-07-2002, 10:51 PM
95+ s14SE 5 lug HUBS (all 4 corners)
$200
cash, paypal, money order
within next 2 months

bing
06-08-2002, 12:31 AM
</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (MarketPlayer @ June 06 2002,5:06)</td></tr><tr><td id="QUOTE"></span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (bing @ June 07 2002,1:11)</td></tr><tr><td id="QUOTE">front lower valance of an 89-90</td></tr></table><span id='postcolor'>
Is that the same thing as a front lip? I can get a lip from a 1990 but it has a few cracks!</td></tr></table><span id='postcolor'>
how bad, how much??

is it still straight???

vicki240sx
06-09-2002, 10:10 AM
I need a right mirror for my door. don't need the whole thing.. jsut the actual mirror itself. I also need a new rear view mirror. Mine moves and wiggles a lot on bumps and I have to ekep readjusting. Doesn't really matter how much as long as it's reasonable. Check/money order. Asap.

Thanks a lot.

HaLo
06-09-2002, 10:28 AM
</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (MarketPlayer @ June 07 2002,2:03)</td></tr><tr><td id="QUOTE">Halo,
I have found a few 240s w/ moonroofs, and i can get the rubber for you, but i lost my screw driver so i couldn't pull it for you! I was a dumbass and didn't ask how much, so tell me a price you don't want to go higher than and i will try and wheel and deal for ya! I did mamage to get the headlight connectors fron a 1990 so i hope it will work for you! I got the wires from the head light connector to the plastic joint piece, so you don't have to splice wires or anything! They wanted $20 for it but i got them down to $15 <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'> <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'> <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'> Once again the dumbass kicked in and didn't ask for the Idle control solenoid, but i am sure i can find it on one of the S13's! Tell me a price an i will haggle w/ them!</td></tr></table><span id='postcolor'>
Hey there!!

Thanks a lot.

For the moonroof, try to get those plastic thingies that are on the roof with that rubber... &nbsp;I'm willing to pay 25$ if everything is in perfect shape.

As for the idle divide control solenoid, I need the gasket that goes with it. &nbsp;I will not pay more that 50-60$ for it. &nbsp;Try to go as low as you can.

Thanks a lot! &nbsp;It's really appreciated.

gtfour43
06-09-2002, 01:05 PM
Hey how bout some gray S13 visors and rear view mirror? Oh and also &nbsp;the drivers side power window switch(my car is a 91 so i think all S13's are same). Thanks

Ryan

MarketPlayer
06-09-2002, 02:11 PM
</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">1991 240...

aftermarket:
spoiler (color doesn't matter, will be repainted)
strut bar(s) (front, rear or both)
intake (injen, or aem)
</td></tr></table><span id='postcolor'>

hahahahaha! &nbsp;Those are all the same things i want as well. &nbsp;I talked to a few of the employees and they say, when that stuff is still on the car they automatically take it and sell it on the internet! &nbsp;Sorry, but i will keep my eye out!

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">95+ s14SE 5 lug HUBS (all 4 corners)
$200
cash, paypal, money order
within next 2 months </td></tr></table><span id='postcolor'>

I am pretty sure i know what you want, but if you could tell me EXACTLY what parts are included in the hub, it would make things easier for us both. &nbsp;I wouldn't want to send you an incomplete hub! &nbsp;Sorry i am pretty new to this kind of stuff!

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">front lower valance of an 89-90

Is that the same thing as a front lip? &nbsp;I can get a lip from a 1990 but it has a few cracks!

how bad, how much??

is it still straight??? </td></tr></table><span id='postcolor'>

I didn't ask how much it would cost, but i am sure not very much. &nbsp;Ok you know were the front of the bumper curves around towards the rear of the car, that is were it has a 1-1 1/2 " crack on both sides. &nbsp;It isn't too noticable, and could easily be fixed w/ bondo! &nbsp;Please tell me what you are willing to spend and and i will work from there. &nbsp;Some of these yards really try to rip people off!

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">I need a right mirror for my door. don't need the whole thing.. jsut the actual mirror itself. I also need a new rear view mirror. Mine moves and wiggles a lot on bumps and I have to ekep readjusting. Doesn't really matter how much as long as it's reasonable. Check/money order. Asap.

Thanks a lot.</td></tr></table><span id='postcolor'>

Umm, it might be easier for me to just get you the whole mirror, casing and all, unless it is easy to remove the glass from the cassing! &nbsp;I am damn sure i can find both of these mirrors you requested, so be ready to see clearly!

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">For the moonroof, try to get those plastic thingies that are on the roof with that rubber... &nbsp;I'm willing to pay 25$ if everything is in perfect shape.

As for the idle divide control solenoid, I need the gasket that goes with it. &nbsp;I will not pay more that 50-60$ for it. &nbsp;Try to go as low as you can.

Thanks a lot! &nbsp;It's really appreciated. </td></tr></table><span id='postcolor'>

The rubber surounding is in perfect condition, and will get as many of the plastic pieces as i can for the moonroof, that way all the plastic pieces w/ have the same color! &nbsp;I still don't know were to find the idle control solenoid, so you might want to start a thread in the tech section for me, so i don't get you the wrong parts!

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Hey how bout some gray S13 visors and rear view mirror? Oh and also &nbsp;the drivers side power window switch(my car is a 91 so i think all S13's are same). Thanks

Ryan </td></tr></table><span id='postcolor'>

You are in luck, i saw some visors that were in perfect shape, all the 240's i looked at had the rear view mirrors attached so there should be enough for everyone, but if i only find one in good shape, the unfortunately you will have to wait for my next trip. &nbsp;The power window switch is no problem at all, so you can count on the visors and switch! &nbsp;Oh yeah, do you just need the plastic button or the actual plug-in inside the door molding?



For everyone...
I will be able to purchase most if not all orders that are under $75, w/ my own money and have you pay me back, but anything over that i need to recieve the money before friday morning! &nbsp;I will try to make these trips to the junk yards every friday, so if you need anything, just let me know! &nbsp;I just want everyone to know that when i ask for the highest price willing to pay, i am not trying to make a profit! &nbsp;I just don't want to purchase something for a higher price then you are willing to pay, and have me stuck w/ the loss! &nbsp;Just concider me a non-profit orginization who will accept tips if offered <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'>

-Zachary Penn
10151 university blvd #164
Orlando Fl, 32817
[email protected] is my paypal account
[email protected] is my prefered e-mail address
checks/money orders/paypal are acceptable forms of payment!

vicki240sx
06-09-2002, 04:02 PM
Could you also look out for a rear bumper in concorde grey for a 95? Thanks

You are freaking awesome. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>

TylerH
06-09-2002, 08:00 PM
I really need a power window motor for my drivers side door ('89).
I'm dying in the summer heat!!

Thanks! &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>

MarketPlayer
06-09-2002, 11:09 PM
Ok, i have been thinking and if the part requested is a complicated piece to remove, then i wil have to charge something for my labor. &nbsp;Sorry to mislead you <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/blush.gif" border="0" valign="absmiddle" alt=':blush:'> but i won't rip you off!

-zac

gtfour43
06-10-2002, 12:56 AM
That sounds fair to me <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'>

someguy_240
06-10-2002, 03:00 AM
Well it would be nice to get some performance cams in my car. Hopefully you can find me some 91' 240sx cams. Also wasnt there the rumor that intake altima cam are a 248 degree? I mean if they are i would love to have, altima intake and a '91 240sx exhaust. Any idea of what that would run me? im not sure bout junkyard prices should be cheap. Also not that much labor, i mean the valve cover is right there! I dunno get back to me on this, k man?

<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'> i aprreciate it <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'>
Dan

TylerH
06-10-2002, 07:29 AM
I know that the piece i requested is hard to remove so i'll pay for labour, it'll save me bundles in the end anyways. If ya could quote me on how much it would cost (labour and part) that would be awesome (for the drivers side power window motor)

Thanks again

Nismos14
06-10-2002, 08:06 AM
</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (vicki240sx @ June 08 2002,1:10)</td></tr><tr><td id="QUOTE">I need a right mirror for my door. don't need the whole thing.. jsut the actual mirror itself. I also need a new rear view mirror. Mine moves and wiggles a lot on bumps and I have to ekep readjusting. Doesn't really matter how much as long as it's reasonable. Check/money order. Asap.

Thanks a lot.</td></tr></table><span id='postcolor'>
there's an adjustment screw on the back of the rear view mirror, tighten the hell out of it and u'll be ok &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/thumbs-up.gif" border="0" valign="absmiddle" alt=':thumbsup:'> &nbsp;i had the same problem every time my music was up lol sucked ass <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'>

vicki240sx
06-10-2002, 12:42 PM
</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (Nismos14 @ June 10 2002,09:06)</td></tr><tr><td id="QUOTE"></span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (vicki240sx @ June 08 2002,1:10)</td></tr><tr><td id="QUOTE">I need a right mirror for my door. don't need the whole thing.. jsut the actual mirror itself. I also need a new rear view mirror. Mine moves and wiggles a lot on bumps and I have to ekep readjusting. Doesn't really matter how much as long as it's reasonable. Check/money order. Asap.

Thanks a lot.</td></tr></table><span id='postcolor'>
there's an adjustment screw on the back of the rear view mirror, tighten the hell out of it and u'll be ok <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/thumbs-up.gif" border="0" valign="absmiddle" alt=':thumbsup:'> i had the same problem every time my music was up lol sucked ass <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'></td></tr></table><span id='postcolor'>
ok cool.. I will check it out.. thanks

sr20mofo
06-10-2002, 06:07 PM
yea if u can find... i would say about 5'5... 110lbs... tan skin... cute face... T and A is a must... race is not an issue, i dont discriminate. thanks! <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'>

KEIVmx
06-10-2002, 06:57 PM
I need some body panels from an S14.
I prefer black, but I will take any color if its in good condition.
Where are you located?

MarketPlayer
06-11-2002, 06:21 PM
</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (sr20mofo @ June 10 2002,7:07)</td></tr><tr><td id="QUOTE">yea if u can find... i would say about 5'5... 110lbs... tan skin... cute face... T and A is a must... race is not an issue, i dont discriminate. thanks! <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'></td></tr></table><span id='postcolor'>
I think i found one, but she has been sitting in the junk yard for about two months and is starting to loose her teeth! &nbsp;You want me to ship her to you?


Well i have sent most of you emails about your postes, so be sure to check! &nbsp;I will poste a thorough reply later on in the week, but i am getting ready to party w/ boys tonight, so i have to go! &nbsp;have a good night, and hopefully i can pick me up one of those 5'5" 110lbs hotties! &nbsp;Any of you in orlando?<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/confused.gif" border="0" valign="absmiddle" alt='???'>?<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/confused.gif" border="0" valign="absmiddle" alt='???'>?<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/confused.gif" border="0" valign="absmiddle" alt='???'>?<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/confused.gif" border="0" valign="absmiddle" alt='???'>?

-zac

bing
06-11-2002, 09:58 PM
about the valance,

i'd prefer one that wasnt cracked, scrathes are okay, but not cracks...

PM me with the cost if you can find one

thanks

MarketPlayer
06-13-2002, 05:42 PM
Ok i am going to make a list of what i am looking for tomorrow, and it can be added to until friday morning!

engine wring harness from a 97-98
front lower valance of an 89-90
aftermarket:
spoiler (color doesn't matter, will be repainted)
strut bar(s) (front, rear or both)
intake (injen, or aem)
95+ s14SE 5 lug HUBS (all 4 corners)
a right mirror for my door
idle divide control solenoid
moonroof rubber seal and plastic pieces
gray S13 visors
rear view mirror
drivers side power window switch
rear bumper in concorde grey for a 95
a power window motor for my drivers side door ('89
altima intake and a '91 240sx exhaust cam shafts
body panels from an S14

Many of these things i can get tomorrow, but others i will have to get price quotes, and source them, so it might be until next friday before i can get them. &nbsp;

talk to ya bright and early tomorrow,
-zac

MarketPlayer
06-14-2002, 03:35 PM
If i was able to get your part then you have heard from me by now so check your private messenger! &nbsp;For those who didn't recieve notices then i couldn't find your part or it will be cheaper for you to find it someplace else! &nbsp;Sorry <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/blush.gif" border="0" valign="absmiddle" alt=':blush:'> &nbsp; alot of those big parts are really expensive and i will need to source it then have you send me payment then i can go buy it and ship it for ya! &nbsp;I will start a new post that might atract more attention later in the week! &nbsp;keep your eyes peeled!
-zac

gtfour43
06-14-2002, 10:09 PM
Hey zac sent u a pm. I will take the visors but dont need the mirror so dont have to look for it anymore. Thanks a million bud

Ryan