brokeAs240sx
05-01-2006, 10:29 PM
Ok,
As some of you know, I just bought a 92, so now I will most likely be parting w/ my sohc. I have a nearly complete sohc turbo setup for sale - missing basically the dump tube (although I have piping for it), and some intercooler piping. Located in So Cal. Can possibly meet in NorCal/Vegas depending on purchase.
1) RealNissan iron-cast T3 manifold (no wastegate flange). Coated inside and out w/ thermo-coating for up to 2000 F by a company in San Diego that does race cars. Brand new, never used. Asking $420 picked up. $440 shipped.
2) Used Garrett T3/T4 turbo. .63 compressor, .60 turbine. Turbine coated inside & out, comes w/ t3 wastegate actuator, wastegate flange that mounts to turbine is also coated inside and out. Minimal/normal shaft play, doesn't go in & out, spins find by hand - but not if you just blow on it. Has tiny crack along wastegate hole - does not affect performance as this is typical w/ used t3's - does not exceed the wastegate flap. Has one bolt hole that has been stripped, but is now high temp gasketed, so is fine. Asking $440 picked up. $460 shipped. Price is firm, I can use this w/ my DOHC setup. If you want the feed & return flanges associated, add another $50. If you want the stainless steel heatshield for the turbine, add $90.
3) CA18DET 370cc injectors w/ eclipse resistor pack. Professionally cleaned for like new performance/flow. Used for 3 months. Asking $150 picked up. $160 shipped.
4) Starion Intercooler and some associated intercooler piping/couplings. End tanks relocated to left & right side (as opposed to all on one side). Asking $250 picked up. $270 shipped. Price is firm, I can use this w/ my DOHC setup.
5) JWT SOHC ECU. Manual Transmission (however, I know how to make a mod to make it work w/ an auto). For 370cc injectors, turbo, and stock maf.
6) SAFC II. Black. Available if injectors sell. Used condition, been working fine @ controlling my 370cc so far. $200 picked up. $210 shipped. Price is firm, I can use this w/ my DOHC setup.
7) SOHC oil pan w/ -10an male bung already welded onto it. I have 2 of these. 1 is installed on the car. I will send the one not on the car first. MIG Welded by my friend. We tested it and it didn't seem to leak. For extra insurance, you should coat it w/ some high temp silicone. $50 picked up. $65 shipped.
Some pictures:
http://nissaninfiniticlub.net/photopost/data/561/407IMG_3014-med.JPG
http://nissaninfiniticlub.net/photopost/data/561/407IMG_3013-med.JPG
http://nissaninfiniticlub.net/photopost/data/561/407IMG_3016-med.JPG
http://nissaninfiniticlub.net/photopost/data/561/407IMG_3017-med.JPG
http://nissaninfiniticlub.net/photopost/data/561/407IMG_3015-med.JPG
http://nissaninfiniticlub.net/photopost/data/561/407IMG_3018-med.JPG
http://nissaninfiniticlub.net/photopost/data/561/407DSC01153-med.JPG
As some of you know, I just bought a 92, so now I will most likely be parting w/ my sohc. I have a nearly complete sohc turbo setup for sale - missing basically the dump tube (although I have piping for it), and some intercooler piping. Located in So Cal. Can possibly meet in NorCal/Vegas depending on purchase.
1) RealNissan iron-cast T3 manifold (no wastegate flange). Coated inside and out w/ thermo-coating for up to 2000 F by a company in San Diego that does race cars. Brand new, never used. Asking $420 picked up. $440 shipped.
2) Used Garrett T3/T4 turbo. .63 compressor, .60 turbine. Turbine coated inside & out, comes w/ t3 wastegate actuator, wastegate flange that mounts to turbine is also coated inside and out. Minimal/normal shaft play, doesn't go in & out, spins find by hand - but not if you just blow on it. Has tiny crack along wastegate hole - does not affect performance as this is typical w/ used t3's - does not exceed the wastegate flap. Has one bolt hole that has been stripped, but is now high temp gasketed, so is fine. Asking $440 picked up. $460 shipped. Price is firm, I can use this w/ my DOHC setup. If you want the feed & return flanges associated, add another $50. If you want the stainless steel heatshield for the turbine, add $90.
3) CA18DET 370cc injectors w/ eclipse resistor pack. Professionally cleaned for like new performance/flow. Used for 3 months. Asking $150 picked up. $160 shipped.
4) Starion Intercooler and some associated intercooler piping/couplings. End tanks relocated to left & right side (as opposed to all on one side). Asking $250 picked up. $270 shipped. Price is firm, I can use this w/ my DOHC setup.
5) JWT SOHC ECU. Manual Transmission (however, I know how to make a mod to make it work w/ an auto). For 370cc injectors, turbo, and stock maf.
6) SAFC II. Black. Available if injectors sell. Used condition, been working fine @ controlling my 370cc so far. $200 picked up. $210 shipped. Price is firm, I can use this w/ my DOHC setup.
7) SOHC oil pan w/ -10an male bung already welded onto it. I have 2 of these. 1 is installed on the car. I will send the one not on the car first. MIG Welded by my friend. We tested it and it didn't seem to leak. For extra insurance, you should coat it w/ some high temp silicone. $50 picked up. $65 shipped.
Some pictures:
http://nissaninfiniticlub.net/photopost/data/561/407IMG_3014-med.JPG
http://nissaninfiniticlub.net/photopost/data/561/407IMG_3013-med.JPG
http://nissaninfiniticlub.net/photopost/data/561/407IMG_3016-med.JPG
http://nissaninfiniticlub.net/photopost/data/561/407IMG_3017-med.JPG
http://nissaninfiniticlub.net/photopost/data/561/407IMG_3015-med.JPG
http://nissaninfiniticlub.net/photopost/data/561/407IMG_3018-med.JPG
http://nissaninfiniticlub.net/photopost/data/561/407DSC01153-med.JPG