Z32 5lug rear hubs

[Zilvia4eva]

I'm staying 4lug,so up forsale is a set of Z32TT 5lug rear hubs and knuckle assembly...

We all know that the TT rears wont work because the input shaft bearing is to big,but you have 2 options to make it work on an S-chassis, have the hubs dismounted from the bearings and have them pressed on your 240sx rear bearings or use bigger beefier Z32TT axles.All Z32 rear hubs are the same,is just that shaft bearings are bigger on TT cars.I'll have them dismounted if the buyer likes.

$120 shipped


pics coming soon.....

[Edgar]

Yea post some pics I might be interested.

[Zilvia4eva]

here are the pics....

http://pg.photos.yahoo.com/ph/s14eva1/detail?.dir=1d6d&.dnm=682ere2.jpg

http://pg.photos.yahoo.com/ph/s14eva1/detail?.dir=1d6d&.dnm=c477re2.jpg&.src=ph

http://pg.photos.yahoo.com/ph/s14eva1/detail?.dir=1d6d&.dnm=a698re2.jpg

http://pg.photos.yahoo.com/ph/s14eva1/detail?.dir=1d6d&.dnm=76c3re2.jpg

[spdfreek0o]

this sale is for the rear hubs and aluminum knuckles?

[Zilvia4eva]

this sale is for the rear hubs and aluminum knuckles?

thanks,

Yeah I guess thats what is called...its the piece that the hub is mounted on.

[JMixedDS13M]

so the knuckles and hubs, but not the e brake assembly, right?

[spdfreek0o]

the hub is pressed into the bearing which is mounted to the knuckle, In the pictures you only show the hub and bearing.

[Zilvia4eva]

I dont know if you noticed,but the bearings are on the knuckles...just look at the 4 bolts in the rear of the assembly...


BTW:It has been sold,thanks for your intrest

[dct223]

spdfreek is right... the pictures you show are only of the hub and the bearing.... on the pictures you showed, the part where the 4 bolts are bolted onto is the bearing itself not the knuckle. The knuckle is where you have to bolt on the bearing/hub assembly onto the car.

[Zilvia4eva]

Ok I see what you are saying...thanks


Again,they have been sold....



thanks,