S13 Wheel fitment, 11" Wide.

[D1champ]

I've been pretty quiet about my ride but now I'm kinda stuck, I have an opportunity to buy some VERY BIG wheels. But i'm not sure if they will fit even if I put on some flares. here are the specs of the wheel (except for the brand and model...secret)

18" 11J
The offsets are 19 and 16 ( I assume the rear are 16, and the front are 19)
5 hole
PCD 114.3

It won't be for drifting, just driving around town in very carefully...cuz of the potholes.

[Angel]

Ok,so it's nonfunctional.... yeah you really should go that way. Ah screw it, do as you wish it's your ride, I bet it'll impress the other boys.

[supportTHEezln]

Why do you care what he uses his car for? Anyways, I think you'll have to worry about both inside and outside clearance on the wheels.

[Angel]

Why do you care what he uses his car for? Anyways, I think you'll have to worry about both inside and outside clearance on the wheels.

Because I have no respect for show cars,cars are meant to be driven not parked to impress all the wankers.
I don't care per se, but if it makes him happy......

[Dousan_PG]

11s up front...ooh dobut it would fit decently
in the rear, yeah no problem, 50mm wide rear fenders some camber and the right tire size and your golden.

might have to run the offset calculator to make sure is cool.

[DoriftoSlut]

They'll fit fine, you won't even have to roll or pull the fenders. And you can definitely get to full lock in the front with no problem, just a little rubbing.

[phreze]

Wow, I think you need some dmax 50 or 70mm fenders for up front for it to even fit. As for tire size? 235/30/18 should work, just a mild strech :)

[D1champ]

They'll fit fine, you won't even have to roll or pull the fenders. And you can definitely get to full lock in the front with no problem, just a little rubbing.

:bs: very funny.

[crazyikimasho]

Wow, I think you need some dmax 50 or 70mm fenders for up front for it to even fit. As for tire size? 235/30/18 should work, just a mild strech :)

30mm front fenders are the biggest he would need for front.

[Irukandji]

haha 235 on 11''... mild strech???

235 is mild strech on 17x9 :p

[D1champ]

What about 30mm flares all around, think that would work?

[FaLKoN240]

Those wheels are retarded large for an S13, I wouldn't even consider that a DEAL. Unless they're some like super rare OMGWTF value show wheels.

[fliprayzin240sx]

Up front...kiss the 11s goodbye cuz theres no way in hell itll work, specially with coilovers. TRUST ME..>I KNOW...itll rub your suspension and dont even think bout turning cuz you will hit the inside fender wall.

Im running 17x10 +12 all around with 8mm spacer up front to clear MR coils. 10s are OVERKILL in the front even just for a daily driver!!!

[infinitexsound]

lol............. no kiddin i love these threads................

[D1champ]

Point Taken, I got out of the purchase. It was wishful thinking I guess. But what type of car do you guys this this was for...I mean 18x11 all around is fucking nuts!

[theicecreamdan]

Im running 17x10 +12 all around with 8mm spacer up front to clear MR coils. 10s are OVERKILL in the front even just for a daily driver!!!

daily driven obviously the most extreme form of motorsport known to man.

[Angel]

I still say ( even after the neg rep ) that you'd be better off and better looking going with something in the 17X9 + 20 range. Lower offset if you want to run over fenders or the like combined with maybe another inch of width. But then again I find it difficult to understand the desire to run wheels that will not work on the track nor the street without huge concessions and compromises.... have fun and ymmv

[FaLKoN240]

daily driven obviously the most extreme form of motorsport known to man.

Daily driving a car is one of the most stressful things you can put a car through.

Traffic, city, bad roads, etc. Plus when you drive a car daily, and go FULL LOCK for u-turns and stuff. I think that's what he was applying that train of thought towards.

[D1champ]

Those wheels are retarded large for an S13, I wouldn't even consider that a DEAL. Unless they're some like super rare OMGWTF value show wheels.

Actually they were SSR SP1 Professors and It was going to cost FOB Japan price is JYE155000.

[Id-]

Because I have no respect for show cars,cars are meant to be driven not parked to impress all the wankers.
I don't care per se, but if it makes him happy......

Meh. Just a hater. I don't care for show cars myself. Especially when they're stock. But this guy's just asking a question about rims here.

Supras run bigger wheels than this. But they run better 1/4 mile and trap speeds than YOUR car with just minor boltons :) Still a showcar? Get off your pedestal kid

[OptionZero]

i dont think they run 11 in front

just because it runs better in a straight line doesn't mean its not a show car

[zero.counter]

No 11s in front, in the rear yes...with work, but then the set will be broken. Look for another deal. The answer to your question has been given in this thread.

[reccakun08]

http://mattmartindrift.com/wheels.php

this is the widest setup ive ever seen on an s13

[fliprayzin240sx]

Daaaaamn 265s on a 12" rim...

[Pank]

Supras run bigger wheels than this. But they run better 1/4 mile and trap speeds than YOUR car with just minor boltons :) Still a showcar? Get off your pedestal kid

uhhh, so what? he's not putting them on a supra. A fucking dumptruck runs like 30 inches of tire in the back, and has more torque than my entire garage, doesn't mean its ok for me to put huge duallies on the rear of my 240sx, though.

Plus, think of the times they could run if they had normal wheels, and not super heavy ass 18's

[Angel]

Meh. Just a hater. I don't care for show cars myself. Especially when they're stock. But this guy's just asking a question about rims here.

Supras run bigger wheels than this. But they run better 1/4 mile and trap speeds than YOUR car with just minor boltons :) Still a showcar? Get off your pedestal kid

Wanker... I was building and tuning 300 hp per liter to the tire supras before you likely had your driver's lc. try again.