auto to 5 speed harness question ?

[s13monkey]

i am i the prosses of doing a swap my question is well do i have to do to the 5 speed harness to make it work with the reset of the harness. i have 5speed trans harness what plugs do i use and were do i connect then to.

[mRclARK1]

Are you swapping your KA to 5spd. or are you putting in an SR?

[s13monkey]

Are you swapping your KA to 5spd. or are you putting in an SR?
am just doing a auto to 5 speed conversion for a ka i have the wire harness foe the 5 speed feom when i both it i just me to know if it would work

[drift freaq]

am just doing a auto to 5 speed conversion for a ka i have the wire harness foe the 5 speed feom when i both it i just me to know if it would work
There is a auto to 5 speed swap faq in the archives and faq section , I suggest you read it. FWIW you do not need the 5 speed trans harness on the S13 due to the fact its OBDI , all you need to do is wire up your reverse lights and connect your speed sensor.

[s13monkey]

what dose the plug for the speed sensor look like and where can i locate the wires for the reverse lights

[jlinder]

Here is the reverse light answers
http://www.zilvia.net/f/showthread.php?t=107415

[projectRDM]

VSS is a 2pin, yellow/black and yellow/red, same plug on both models.