PDA

View Full Version : output shaft seals


lcpljrm
04-14-2006, 01:10 PM
okay, so i'm installing my diff here in a few days. i was looking at the output shaft seals, and there are two different components i see. one is a small roundish rubber looking deal, and the other is a metal piece with a flared lip. the metal one almost looks like some sort of bearing. i'm curious. are both of these wear parts? should i just get the new rubber seals, and only replace the metal ones if mine are damaged? thanks.

04-14-2006, 01:12 PM
you should always replace your side seals and front pinon seal...

lcpljrm
04-14-2006, 01:26 PM
hmm, i see. but do i need both the metal and rubber parts?

http://www.oreillyauto.com/EW3/ProductDetail.do?id=25642506&keyword=seal&descriptionId=1091

04-14-2006, 02:05 PM
The spacer before the adjust shims?

What are you doing exactly? If you are changing LSD's I would recommend re-shimming it... If you are not, then just change the seals or you could throw off the adjustments made for your current LSD...

lcpljrm
04-14-2006, 02:37 PM
i'm changing the differential. on the fsm diagram, there is only one "side shaft seal" listed, so i don't know why o'reilly has two different parts labeled the same thing.

04-14-2006, 03:18 PM
Let me know the parts you are looking for... I give zilvia members below wholesale pricing on OEM Parts...

Here is a blow up of all the parts in your differential... If you are changing only your differential (and not touching your pinion) then you should need the 2 side seals, 2 side spacers, and the 2 adjust shims,

http://img.photobucket.com/albums/v461/PerformanceNISMO/Car%20Stuff/s13380b.jpg

lcpljrm
04-14-2006, 03:38 PM
could you PM me a price on those?

btw, is that the FAST system?

04-14-2006, 03:40 PM
Yes that is NISSAN Fast...

I am a NISSAN Dealer... But discount to Zilvia Members...