sileighty front end convo

[project_240sx]

hey does anyone know of a site where it would show how to do a complete s13 front end conversion on a 92 fast back? i just need to know how to wire everything. thanks

[g6civcx]

Not that I know off. The stuff you find are incomplete at most. Beyond the nuts and bolts, what wiring do you need to know?

[project_240sx]

sorry i ment like how to install. i have every nut and bolt, im just not that sure about wiring the head lights.

[mrmephistopheles]

search here. You'll find the answer.

[g6civcx]

Headlights plug right into the popup harness. Do you have fog lights?

[project_240sx]

no i do not have fog lights. thats what i was wondering. like do i have to wire a button? and put it to like a 12 volt source?

[g6civcx]

It plugs right into your headlamp harness. No modifications needed. Does your Silvia lights have fogs in them?

I updated this thread with some pix for you: http://www.zilvia.net/f/showthread.php?t=85752&highlight=fog

[!Zar!]

You unbolt the current front end.

Bolt on the new one.

Plug in the headlights.

Done.

mrmephistopheles gave you all the help you need.

[JXN]

im with zar lol

i guess its a little hard to wire up the signal lights and fog lights.

catch me on aim if you cant find answers, I'll tell ya

[!Zar!]

For the fogs. Either wire it to the headlight or just wire it to your spare harness into the brown and black wire. Then remove both headlight retract relays.

Or follow the tech.

I found it easier to do without it.

http://www.zilvia.net/f/showthread.php?t=85752

[g6civcx]

The wiring is really easy once you've figured it out. It's nice to have foglamps so may as well use them.

The parking light harness plugs right in. No modification needed. The turn signal harness also plugs right in, but you also have to tap it since there is an extra turn signal in the corner lamp of the Silvia. It's just 2 wires: one for signal power and one for ground. I'm sure you can figure it out if you look hard enough.