s13pignose
04-02-2006, 01:47 PM
Ok I test fitted my silvia grill today on my zenki. Took two plastic screws off than pulled straight up on the on the original grill. Makes a pop sound as it comes off. So I get the silvia and put it on, but I noticed when it goes in the 3 bumper tabs there's no snap into place type of sound. So I just ignore. However when I put the screws in, the driver side of the silvia grill, had to be pushed against some, for me to slide the screw in. This made the grill not as flush with the bumper. With out the screws, the grill is PERFECT.
So what I was thinking about is just using zip ties instead of screws, to keep tension of the driver side, and keep it flush.
Also when I put the old grill in, it snaps in place, but only passenger end hole. The tabs in the other holes seemed to have prongs missing on the lil clasps. Anyway how important is it for the new grill to snap into place. I mean its in their kinda firm, but it did come out a lil easier than the old one.
Guess what Im saying is I don't want my grill flying off
So what I was thinking about is just using zip ties instead of screws, to keep tension of the driver side, and keep it flush.
Also when I put the old grill in, it snaps in place, but only passenger end hole. The tabs in the other holes seemed to have prongs missing on the lil clasps. Anyway how important is it for the new grill to snap into place. I mean its in their kinda firm, but it did come out a lil easier than the old one.
Guess what Im saying is I don't want my grill flying off