BRS Widebody Turbocharged Miata fs/ft [Archive] - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

View Full Version : BRS Widebody Turbocharged Miata fs/ft

richardxfeng

03-23-2006, 01:32 AM

I am posting this for my friend. He is selling his Widebody,turbocharged 1990 Miata.
Here is the mod list:
Engine:

Bolt-on greddy turbo kit
custom V-mount and pipes
greddy blow-off valve
Custom Koyo racing radiator
vortech Fuel riser
TRD adjustable fuel regulator(not yet installed)
B&M fuel pressure regulator
Auxilliary MSD in-line fuel pump
3 inch exhaust pipe
It has about 175xxx miles on the chasis. Dropped in a used motor but don't know how much miles on it. Compression test and leak down test done and all showed same pressure from 1 to 4 cylinder.

Exterior:

BRS bolt-on widebody kit
custom rear wind diffuser
Bomex rear wing
Hard-top
custom hood (functional for V-mount)
intercooler duct (for V-mount)
radiator duct
Toyota red (pt code: 3PO)

Interior:

Nardi classic steering Wheel (red stitch)
FET detachable Hub
Genesis carbon Kevlar bucket seats (L&R)
Autopower rollbars
Sparco seatbelts
Autometer boost gauge
Autometer AFR gauge

Wheels:

Custom 17x8.5 works vs-xx wheels front
Custom 17x10 works vs-xx wheels rear
215/40/17 nitto
255/40/17 falken (use to ran 275/40/17 nitto's but too big)

$11,000.00 OBO. Also willing to trade for clean S13, S14 and Sedan.Car is located in Fontana,California but he works in City of Industry and sometimes drives the car to work.

Again,THIS IS NOT MY CAR,DON'T PM OR EMAIL ME. Please contact my friend,Mike at [email protected]

http://i17.photobucket.com/albums/b86/richardxfeng/miatasema.jpg
http://i17.photobucket.com/albums/b86/richardxfeng/0131.jpg
http://i17.photobucket.com/albums/b86/richardxfeng/miata2.jpg
http://i17.photobucket.com/albums/b86/richardxfeng/miata1.jpg
http://i17.photobucket.com/albums/b86/richardxfeng/miata4.jpg
http://i17.photobucket.com/albums/b86/richardxfeng/P1010503.jpg
http://i17.photobucket.com/albums/b86/richardxfeng/P1010502.jpg
http://i17.photobucket.com/albums/b86/richardxfeng/P1010509.jpg
http://i17.photobucket.com/albums/b86/richardxfeng/P1010507.jpg

Thanks for looking!

khmerguy618

03-23-2006, 01:51 AM

such a nice car, too bad those wheels are 114.3 so they could fit on s13s.

timlush

03-23-2006, 04:22 AM

kinda looks like a 350z

richardxfeng

03-31-2006, 01:49 PM

Bump the first time!

exitspeed

03-31-2006, 02:25 PM

Hardly looks like a Miata. More like an orgy with rims...

Bump

ESone3

03-31-2006, 02:38 PM

a miata I would drive

BEISSEN

04-01-2006, 07:08 AM

lowviscosity

04-01-2006, 08:33 AM

ThatGuy

04-01-2006, 10:23 AM

The lips on the wheels look different because they are different wheels! The vinyl can easily be removed, although the symbols on the rear pillars are identical, as is the vinyl across the windshield. Intercooler set-up can be changed as well. I don't see what's so strange to you? The pictures were abviously taken at different times. Even if it they are completely different cars, it's not like one of them isn't worth it and the other one is. Here's the question you should really be asking: "Can I afford to buy this? Do I want to buy this?" If not, then why even bother to clutter up this guys thread?

Phlip

04-01-2006, 10:33 AM

Kinda Contradicting Pics imo,the first ones show the FMIC in the front with Decals on the car and the rims are differant as well in both pics.The Car show has small lips and the outside ones have a large lip.Then the next set show it with the Intercooler in the Engine bay.Looks fishy to me.they kits can be the same and paint but I dont know but anyway car looks good.
Yeah top and front mounted intercooler???

Hmm
Here, I will do you both a favor, I am going to cut the pictures from the original post and highlight the part that makes it all make sense, okay? Here goes:
I am posting this for my friend. He is selling his Widebody,turbocharged 1990 Miata.
Here is the mod list:
Engine:

Bolt-on greddy turbo kit
custom V-mount and pipes
greddy blow-off valve
Custom Koyo racing radiator
vortech Fuel riser
TRD adjustable fuel regulator(not yet installed)
B&M fuel pressure regulator
Auxilliary MSD in-line fuel pump
3 inch exhaust pipe
It has about 175xxx miles on the chasis. Dropped in a used motor but don't know how much miles on it. Compression test and leak down test done and all showed same pressure from 1 to 4 cylinder.

Exterior:

BRS bolt-on widebody kit
custom rear wind diffuser
Bomex rear wing
Hard-top
custom hood (functional for V-mount)
intercooler duct (for V-mount)
radiator duct Toyota red (pt code: 3PO)

Interior:

Nardi classic steering Wheel (red stitch)
FET detachable Hub
Genesis carbon Kevlar bucket seats (L&R)
Autopower rollbars
Sparco seatbelts
Autometer boost gauge
Autometer AFR gauge

Wheels:

Custom 17x8.5 works vs-xx wheels front
Custom 17x10 works vs-xx wheels rear
215/40/17 nitto
255/40/17 falken (use to ran 275/40/17 nitto's but too big)

$11,000.00 OBO. Also willing to trade for clean S13, S14 and Sedan.Car is located in Fontana,California but he works in City of Industry and sometimes drives the car to work.

Again,THIS IS NOT MY CAR,DON'T PM OR EMAIL ME. Please contact my friend,Mike at [email protected]

*snip*
No one else really needs to post in this thread, since the member that started it left explicit instructions as to how to contact the person selling the car, this is not the place for discussion of what is on the car or to question differences in photography.

BEISSEN

04-01-2006, 03:08 PM

Philip you are right in a way,But thatguy you are not sorry but anyone on these boards has a right to come and express thier thoughts.It was done to me in my threads that got pinked even mods expressed themselfs.The reason I said in a way Philip was cus why sow pics that are contradicting just show what the product is.I expressed thought here for others to look and yes parts can be changed.