View Full Version : Intresting manifold... take a look *pix inside*
Check it out. Pretty neat huh?
http://i7.photobucket.com/albums/y259/mmdb/Misc/rk4qpz.jpg
projekt_s13
03-22-2006, 11:20 PM
Is that for the Ka?
CrazyIvan
03-22-2006, 11:23 PM
looks like it, but the first runner doesnt look to good
nismoman
03-23-2006, 10:00 AM
doesnt look all that great for performance, the way the runner dump into the others at 90 degrees cant be good for flow. But then I'm no engineer.....
rainier
03-23-2006, 10:07 AM
+1 for those 90 degree angles. looks pretty crazy though
Angel
03-23-2006, 10:10 AM
May as well leave the flange off of it.... performance will be about equal.
Did they run out of pipe??
wootwoot
03-23-2006, 11:52 AM
Maybe its a sculpture?
NemeGuero
03-23-2006, 04:14 PM
Yah, any actual flow figures on this design?
SimpleSexy180
03-23-2006, 04:27 PM
i like that design. If it actually flows better than stock, i would get one.
wootwoot
03-23-2006, 05:14 PM
What an interesting proclaimation that is.
sittinsideways
03-23-2006, 07:07 PM
doesnt look all that great for performance, the way the runner dump into the others at 90 degrees cant be good for flow. But then I'm no engineer.....
ya man i'm no engineer either but 90s cant b good for flow, which is why a strighter exhaust, or one with less or less severe bends produce bigger gains?
ThatGuy
03-23-2006, 07:14 PM
I'm hoping that is just an experiment in welding. :duh: :eek: :rofl:
theicecreamdan
03-23-2006, 07:22 PM
90* bends right out of the manifold shouldnt be a problem, the crazy off collector lenghts suck though, make it equal lenght, or close to it, and make #1 connect to #3 and #2 and #4 connect instead of the order those are in.
Ricks15
03-23-2006, 08:46 PM
Medusa style manifold :rofl: that manifold would not be ideal for a NA engine cuz you need free flow not restriction, thats unless its done right Medusa style manifolds are very popular for turbocharged engines but like I said those crazy bends will rob HP.
95zilvia
03-23-2006, 09:22 PM
It looks like crap.
S14DB
03-24-2006, 01:15 AM
KA mani builder dropping acid?
!Zar!
03-24-2006, 03:19 AM
That looks like it's straight out of tetris or something with those crazy bends.
zze86
03-24-2006, 10:08 AM
what a weird design...1 dumps into 2, 3 dumps into 2 and then it looks like 2 dumps into 4
wootwoot
03-24-2006, 10:28 AM
90* bends right out of the manifold shouldnt be a problem, the crazy off collector lenghts suck though, make it equal lenght, or close to it, and make #1 connect to #3 and #2 and #4 connect instead of the order those are in.
Thats my problem with it not the bends..
It looks like the pipes from Mario
sr240mike
03-24-2006, 02:22 PM
Im suprised none of you noticed that it doesnt dump anywhere but into the 4th runner going into the engine. So its obviously a joke that flew by all of you. Reminds me of the time Luke took a huge ass turbo and bolted it to his sr and everyone believed that he was going to run it.
blu808
03-24-2006, 02:41 PM
Yea are mike and i the only people that realize all the tubes are going out of one cyl and back into another. haha.
The guy that built it should try it. hahahaha :rawk:
S14DB
03-24-2006, 02:45 PM
what a weird design...1 dumps into 2, 3 dumps into 2 and then it looks like 2 dumps into 4
Im suprised none of you noticed that it doesnt dump anywhere but into the 4th runner going into the engine. So its obviously a joke that flew by all of you. Reminds me of the time Luke took a huge ass turbo and bolted it to his sr and everyone believed that he was going to run it.
I'm surprised that you didn't notice that someone already said that. :Owned:
Angel
03-24-2006, 02:54 PM
Im suprised none of you noticed that it doesnt dump anywhere but into the 4th runner going into the engine. So its obviously a joke that flew by all of you. Reminds me of the time Luke took a huge ass turbo and bolted it to his sr and everyone believed that he was going to run it.
That's why I wrote that he needn't even bother adding a flange.
blu808
03-24-2006, 02:57 PM
Woot shock not paying attention on my part.
dohh. :duh:
NemeGuero
03-24-2006, 05:55 PM
You can't really see #4.. and maybe.. its.. not.. finished yet?
But still.. poor design.
RSP13-Sideways
03-24-2006, 09:45 PM
That's gotta be a welding project.....I am amazed.
its CARBs new method of keeping emissions in the engine!
koukidough
03-25-2006, 12:25 AM
looks great in an artistic way. But seeing how thin those pipes are it ain't gonna last.
Nan Desu Ka?!
03-25-2006, 04:39 AM
looks great in an artistic way. But seeing how thin those pipes are it ain't gonna last.
Wow... way to completely miss the entire thread above you. the tube thickness is the LEAST of whoever would be stupid enough to run that's worries.
Mirage
03-25-2006, 10:43 AM
http://www.honda-tech.com/zerothread?id=1561886
Its for a Hyundai. In short, he was told it was crappy, revised it, still crappy, going to redo it with a collector now instead of that wierd thing going on.
S14DB
03-25-2006, 03:11 PM
This is a 10x better pic:
http://tinypic.com/rk4qw9.jpg
and the improved model....
http://img360.imageshack.us/img360/2258/p10001277ru.jpg
theicecreamdan
03-26-2006, 11:28 PM
#3 doesnt even need piping, straight outta the head.
Romeyo07
03-27-2006, 06:30 AM
still a little lost on where it actually leaves the header
S14DB
03-27-2006, 08:51 AM
T25 flange was to go on the top of the 3 point.
wootwoot
03-27-2006, 12:03 PM
I'm gonna cry soon at this rate
James
03-27-2006, 12:10 PM
looks interesting :coold: :hyper:
jessfx
03-27-2006, 10:40 PM
it's like that picture of the '100% backpressure catback exhaust.'
BigVinnie
03-28-2006, 09:32 PM
None of the runners share equal lengths. Cylinder 1 looks like it might burp and fart a little too much....
If that is a (Conceptual design) I wonder where the turbo would go. But yeah it does look like 100% back pressure if there is no down pipe. I think it could of been a serious concept to somebody.....
infinitexsound
03-28-2006, 09:51 PM
if it burps and farts like a subie... it definetly would sound obnoxious like a rotary... freakin snow mobile chain saw.....
hitman
03-28-2006, 11:23 PM
But yeah it does look like 100% back pressure if there is no down pipe. ....
shows what you know!! fucker!
your an ass to other people so ill be a ass:rl:
the downpipe does not go on the turbo manifold. it bolts up to the turbo. so why dont you see a downpipe? cuase it doesnt bolt to the turbo.
koukidough
03-29-2006, 12:10 AM
wow a recirculating header!!! +200hp!!!
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.