oil pressure gauge question

[95-2Froties]

I was wondering where the sensor hooks up at on the SR20DET. If anyone could help me out or show me a picture it would help greatly.

Thanks

[1mns13]

In the oil filter housing.

[Dousan_PG]

u should get a sandwich adapter, good when u add oil temp too
splparts.com
aspecproducts.com

etc etc

[finesses240]

you can take out the factory nissan one, it's next to the oil filter. You need an adapter though, one that goes from BSPT to NPT, cause most oil pressure sending unit's are NPT (atleast the autometer one is that i know of). Also on mine i had to use a 45 degree angle as well to allow it to fit, because straight on would hit the oil filter. hope that helps

[fliprayzin240sx]

Or if you got an S13 SR with stock manifold, spend the loot and get yourself either the greddy filter relocation kit or the oil pan, they both have fittings for the sensor. Relocation kit with make it 48957049 times easier to change your oil while the oil pan will be that much more better than stock pan.