T25 and T28 Polished Aluminum Intakes, round 2!! as low as $50 shipped!

[Pepperoni]

PipingPro.com Group Buy - Pro Intakes

The last group buy was very successful and I chose to continue these for a new group buy!

I am custom making these pipes for your T25 or T28. The stock rubber piece has a spiral looking thing inside that is supposed to help keep the intake from collapsing under boost, and keep the spool noise down.
You no longer have to worry about that!
This 2.5" aluminum pipe allows you to clearly hear your turbo spool louder!! Plus, (if your BOV is near the intake) you no longer have to sacrifice performance for sound -- if you recirculate with a custom pipe, you no longer just hear a "swoosh" like you did with the stock piece, but it will sound closer to the way it was meant to be heard!! My greddy type s bov is still loud recirculated, unlike when it used to be run with the rubber piece.

Free up some HP, help your turbo breathe and hear that baby spool!! :D

Here are a couple of pics taken from the last group buy:

http://img365.imageshack.us/img365/5866/stockvalum9ix.jpg

T25:
http://www.pipingpro.com/shop/images2/t25intake1.jpg

http://img497.imageshack.us/img497/4624/shawn4192nr.th.jpg (http://img497.imageshack.us/my.php?image=shawn4192nr.jpg)

T28:
http://www.pipingpro.com/shop/images2/pros14int.jpg

GTiR T28
http://www.pipingpro.com/shop/images2/pros14int2.jpg

Kits come with blue Option Racing couplers and clamps, hose for catch can (if applicable), two brackets for bracing, and your chosen polished aluminum intake pipe.

Pricing:
These prices all include shipping (which costs about $10-12)

T25
Kit 1 -- Intake pipe with catch can bung: $60 shipped
Kit 2 -- Intake pipe with catch can bung and BOV recirculation bung: $70 shipped
Kit 3 -- Intake with BOV recirculation bung: $65 shipped
Contact me if you want a bungless pipe.

T28
Kit 1 -- Intake pipe, no bungs: $50 shipped
Kit 2 -- Intake pipe with catch can bung: $55 shipped
Kit 3 -- Intake pipe with BOV recirculation bung: $60 shipped

Catch can bung sizes:
Please tell me which size you want me to use. I have three sizes, 10mm, 12.7mm (1/2 inch), and stock size 19.05mm (3/4 inch).

Z32 MAFS Owners:
I can supply a coupler reducer for your MAFS. The cheapest I've seen is on ebay and they're $9, but i will offer them for only $6.50. Just add that to the total.

Upgrade to T-Bolt clamps: Add $6 to the total for two stainless steel t-bolt clamps. $12 for four t-bolt clamps.

Air filters:
We are offering air filters as well. Just add $20 to the order. For info please go to http://www.pipingpro.com


Important:
Keep in mind that these are all custom made, and are done to the best of my ability. To get the best possible outcome, it would be very helpful if you provided pictures of your setup (ESPECIALLY if what is involved is very intricate). When ordering, make sure you let me know what MAFS you're using, possibly air filter, and where your BOV/catch tank is located, along with some pictures if possible.

I prefer PayPal but will accept Money Order.

-Aure

[REDSH!FT]

Are these made to order and shipped out or is there a wait?

[95zilvia]

I've been meaning to drive to you to pick one up!...
Maybe someday.

[Pepperoni]

Are these made to order and shipped out or is there a wait?

There is a general wait time of one week. I ask buyers to give me about a week for me to complete a pipe, but it generally doesn't take that long. Oh and for this group buy, you don't need to wait for a certain amount of people to buy in. It's an ongoing deal

I've been meaning to drive to you to pick one up!...
Maybe someday.

just let me know! i could always just ship it to you

[WILDACEX187]

man i gotta get my engine in my car so i can get one of these already. save one for me pepperoni!!! lol

[bcrume]

where are you located?

[Pepperoni]

man i gotta get my engine in my car so i can get one of these already. save one for me pepperoni!!! lol

hurry up with the swap! this deal won't last forever! ;)

where are you located?

Sent you a PM

[REDSH!FT]

How do we go about placing an order with you? I would like to order one for my car.

[Pepperoni]

How do we go about placing an order with you? I would like to order one for my car.

I sent you a PM - For everyone else, just PM me or email me with info on your setup and any additional info you think I should know about. You can send payment whenever you want, but I do want to quickly discuss the locations of the bungs on the pipe (if any) to make sure you're getting what you want.

[slider2828]

YGPM thanks again for a cool product.

[Alexe]

hey man. just checking in making sure you didnt forget about me. i sent in my payment on mar 1st.

[Pepperoni]

hey man. just checking in making sure you didnt forget about me. i sent in my payment on mar 1st.

Hey,
Nope I didn't forget about you. I might of forgotten to email you the tracking info. I'll PM it to you. I shipped out the intake days ago, you should receive it soon.

[boosteds13]

Just curious on the difference between the T25 and T28 pipe. I have a T25 now, but it will only be on for a couple months til I get a T28. I am assuming it has something to do with the compressor inlet piece? If so, I was planning on reusing that with the T28, so should I just order the T25 one?

[Pepperoni]

Just curious on the difference between the T25 and T28 pipe. I have a T25 now, but it will only be on for a couple months til I get a T28. I am assuming it has something to do with the compressor inlet piece? If so, I was planning on reusing that with the T28, so should I just order the T25 one?

Yup you're right. The difference is in the turbo inlet. The T28 intake pipe has one bend while the T25 intake pipe has two bends. If you're going to be using the T25 inlet, then you should get the T25 intake pipe.

[ca18det_boy]

How long is this going on for?

[dizbjello]

just got mine the other day and it looks great!

[TechImportz1]

i need to pay you... PM me the information... Thanks

[Pepperoni]

I'm not sure how long this group buy will be going for yet..

i'm going on vacation from 3/18 to 3/25 (one week), so I won't be able to do any pipes that week. I will be accepting payments probably until 3/15 (wednesday). If ordered by wednesday, i'll be sure to ship them all out before I leave. i will be answering emails and such. If you decide to order during the week that I am gone, I will make the pipes on a first come first serve basis. so if you put in your order first, you'll be the first to get their pipe once i return

[boosteds13]

Just sent payment for a T25 kit w/bung and MAFS coupler. Forgot to include in the payment the size for the bung. 1/2" should be good as its the closest to the size of the port on the valve cover on my CA18.

[KiDyNomiTe]

For the T28 kit, what t28 is it? S15 or S14. I have an s15 t28 using t25 inlet, just wondering if it will fit right. AFAIK they point differently but due to the ribbed pipe it can bend a little.

[Pepperoni]

For the T28 kit, what t28 is it? S15 or S14. I have an s15 t28 using t25 inlet, just wondering if it will fit right. AFAIK they point differently but due to the ribbed pipe it can bend a little.

Hi,
The T28 intake applies to both S15 and S14, because S15 inlet=S14 minus the extra bung the S15 inlet has. If you're using the T25 inlet, you should be getting the T25 intake.

[KiDyNomiTe]

66.50 sent for t25 kit with stock bung, z32 mafs

[Pepperoni]

Thanks I will be sending you tracking info once it's shipped!

i'll accept last min payments today and will be shipped out by tomorrow. If not you'll have to wait another week until i get back!

[boosteds13]

I got mine and it looks great, but is it supposed to be really loose where it attaches to the inlet piece on the turbo (where the coupler attaches to the turbo inlet pipe)?

[Pepperoni]

No not at all. Try attaching/tightening the coupler on the inlet first alone, then connect the pipe and tighten it, or vice versa. Make sure the clamp is holding the whole coupler and not half of it. It's easier if you connect the coupler first and clamp it alone to be sure you put it on correctly.

[ca18det_boy]

Just sent in the payment!

[boosteds13]

Yeah, I got it on there... I just meant that the coupler slides over the inlet pipe very easily. But once you clamp it down, it's fine.

Pic for everyone!

http://www.escic.com/240sx/intake.jpg

[REDSH!FT]

Just wanted to chime in and give props where they are due.

I paid on March 10. By March 16th I had already missed 1 delivery because I didn't realize it was going to come so soon...so no one was home to receive it!

Pipe looks awesome, great price for great goods. The silicon couplers could be a little better but that's not a huge deal. I would have paid the same $60 for just the pipe and hardware kit.

Thanks a bunch Aure!


EVERYONE should buy one of these for their SR...Don't waste your time w/ a filter on your POS accordian intake pipe!

[Grey240Drift]

Hurry and get back! I will buy one of these when you return.

[ca18det_boy]

HAHAHAHA damn, I paid for this last thursday and recieved it bright and early this morning! This guy has super fast freakin shipping and it looks pretty sweet to boot!

[Dante319]

Hey guy as soon as you come back from vacation I'll be getting one of these. Now my engine is a ka-t with the ssa bottom mount manifold that places my S15 T28 in the same position as an SR for that matter. The T28 is using its own inlet, but my hotpipe is for an S13 going through the hole for the old resonator box. I could post a pic tomorrow to give you an idea of what I'm running, please get back at me as soon as you come back from your vacation.
Thank you:rawk:

[whitey240]

surprisingly, I received my pipe today. I was thinking to myself damn thats sick turn around especially when I ordered it late last Wednesday. First thing i see was the silicone connectors, well they are pretty much the cheapest ones you can get. OK thats not to bad, I can replace that. So then I look at the pipe. the welds were far from clean, I have only been welding for a few months and I have made cleaner. Then for some reason there is a spot on the pipe where maybe a plug went that is now welded shut. and not very clean either. Definitely just wish I would have made my own instead of paid 65 bucks for a decent product. The only thing that is good is the fitment. just from eyeing it up it seems like it will be a nice fit. So now I am going to grind down the welds, clean them up and just powdercoat it. I hate when things don't look clean

[Pepperoni]

whitey240, i'm sorry you are not completely satisfied with the product. I try to do the best I can on each pipe, especially when I'm trying to pump these out by myself. As you stated, you should know that aluminum is significantly harder to work with than metal. If you are looking for a pipe that is factory welded, perfect from defects, and "cleaner", I suggest you go to Enjuku, heavythrottle, Greddy, etc. and pay the $200+. Everyone else, thank you and glad the pipes got to you guys okay. I'll be returning late saturday :)

[mrsynister]

bought a kit from aure! great product. you can really hear that turbo spool. especially if u have a ball bearing turbo. and the bov, loud as hell depending on what bov u have. i have both the greddy type s and type rs. i like the sound of the type rs better. sounds like a whip!!! u wont be disappointed with his product. great job aure!!!!

[reverend_sean]

I am in too. Shoot me a PM Aure!

[Grey240Drift]

Sent you a PM

[Pepperoni]

thanks guys. im tryin to take care of everybody in chronological order. if you havent heard from me please let me know, but i think i replied to everyone's PM/emails

[DriftChicken]

Yup you're right. The difference is in the turbo inlet. The T28 intake pipe has one bend while the T25 intake pipe has two bends. If you're going to be using the T25 inlet, then you should get the T25 intake pipe.
From what I've read when going for T28 on s13 sr you have to use the t28 inlet pipe for s14/15. Otherise the pipe if in a weird position, no room. I'm now assuming that this will affect which pipe you go with, right?

What I'm getting at is that it sounds like the t25 version will not work when you upgrade to t28 turbo, which requires a t28 inlet pipe and, hence, matchign t28 intake pipe.

Here's my source...

http://forums.freshalloy.com/ubbthreads/showthreaded.php?&Board=UBB9&Number=168010

Now... I'm pretty sure of what I jsut said. Please read the link and let me know if I've misinterpreted (sp?) it.

Thanks

- Chicken

[gsxrbg]

ok i really need one with no bungs,bov is on the coldpipe

[Pepperoni]

From what I've read when going for T28 on s13 sr you have to use the t28 inlet pipe for s14/15. Otherise the pipe if in a weird position, no room. I'm now assuming that this will affect which pipe you go with, right?

What I'm getting at is that it sounds like the t25 version will not work when you upgrade to t28 turbo, which requires a t28 inlet pipe and, hence, matchign t28 intake pipe.

Here's my source...

http://forums.freshalloy.com/ubbthreads/showthreaded.php?&Board=UBB9&Number=168010

Now... I'm pretty sure of what I jsut said. Please read the link and let me know if I've misinterpreted (sp?) it.

Thanks

- Chicken

thats right. T25 inlet is much different than T28's. I'm sure you could cut up the T25 intake pipe and get it to work with the t28 turbo, but you might as well save money and get the T28 pipe.

[gsxrbg]

please get back to me pepperoni i really want one of these

[nrg]

I'm upgrading t28 on my s13 sr and using z32 maf.
I would need a piping made just like the OEM t25 version, but with the t28 size. BOV and catch can buns on them too with reducer couplin.

Price on this please.

edit: are these piping Exactly like OEM. Just from your pictures, it seems like the bov recir valve is facing the wrong direction. It should be pointed stright at the rad support, instead of tstright up to the valve cover; like in those pictures.

[shiftnslide]

edit: are these piping Exactly like OEM. Just from your pictures, it seems like the bov recir valve is facing the wrong direction. It should be pointed stright at the rad support, instead of tstright up to the valve cover; like in those pictures.

who cares what oem is like.. who has an oem front mount and hotpipe? he puts the recirc bung in the spot where there is as little vacuum tubing to the blow off valve as possible. mine only has like 4-5 inches of vacuum tube between the blow off valve and intake. i've had mine for a number of months now and don't stall when i go into neutral right after boosting like i used to before my bov was recirc'ed.

http://img.photobucket.com/albums/v161/star01/brians%20car%20pictures/IMG_3437.jpg
http://img.photobucket.com/albums/v161/star01/brians%20car%20pictures/IMG_3439.jpg

[nrg]

who cares? obviouslly I do. My recirculated valve is already cut and measured by the OEM location. my hks hot pipe with hks ssqv is facing the other way compared to yours. If he can't make it as OEM as possible, then what's the point of my interest? I could make these myself in my garage with my tig welder.

http://img339.imageshack.us/img339/9669/untitled18kh.jpg

It's pretty obviusly that he made that recir valve perfect for "leaky" greddy bov.

[Pepperoni]

nrg, everyone's BOV is facing differently and like shiftnslide said, I try to put the bung as close to the BOV as possible for a cleaner look, and reduce the hose length.

I do hesitate to put together an intake with setups like yours especially when you're upgrading to T28 and not sure where everything is going yet. The stock bung will most likely be moved up higher if using the stock t28 intake, and I don't know how that will affect your hosing.

And the bungs I use are not BOV specific..

I can only do so much with pics and can only theoretically guess where your future t28 hosing will trace to. I think you should just wait to see how the t28 mounts and where exactly is when put together... to avoid headaches, at least.

If you could make it yourself, you probably should. That way you're 100% positive the intake is put together the way it should be for your setup

[gsxrbg]

do you have one with no bungs or bov flange?

[nrg]

Pepperoni, It's a s14 t28 on a s13 sr. it will face exactly like s14 sr20det, but with s13 bov and catch can bungs.

this one doesn't look clean at all =S
http://i7.photobucket.com/albums/y264/Cdoria/DSC02651.jpg

[Pepperoni]

gsxrbg, ill send you a PM

nrg, as for that pic, i dont know where else you would mount the bung to make it look cleaner, i dont think it looks as bad as you make it out to be. sounds like you made your decision already, thanks for the interest.

[daredevildoug]

What is the status of my order? i sent you a payment the other day. lmk. thanks


-derrick

[RaidenKing]

I'll take one for an s14 t28

[drifter808]

hook me up with one for a stock redtop with no recirc bung. send me a pm for full details

[NiSmo240luvR]

id like a bungless one for an s13 blacktop with a stock t25...how much?

[daredevildoug]

aure, nice job with shipping and the actual product. thanks. i like it alot...


-de

[jdms14_silvia]

Gonna Take Some Pix And Ill Hit You Up.. Very Interested..

[gsxrbg]

hey i got mine the other day and i want everyone to know that its worth every penny you cant beat the price and the quality, plus it comes with everything you need to install it,i put mine on and i have to say that it makes that little t25 sound like a jet engine the boost is alot more snappy too you dont have the stock tube expanding and contracting loosing pressure,he promised it by the weekend and sure enough it was on my door step fri night....thanks pepperoni ill post some pics

[Dante319]

:aw: Hey Aure just sent you payment and pics to your email address.

[sc ka24e]

hey aure im very intrested i have a s13 red top with a gt28 i just need an intake with a catch can bung stock size is fine

[Grey240Drift]

Thanks again!

[dvdevo]

great intake!

http://img.photobucket.com/albums/v225/tehdvd/ResizeofIMG_3486.jpg
http://img.photobucket.com/albums/v225/tehdvd/ResizeofIMG_3485.jpg
http://img.photobucket.com/albums/v225/tehdvd/ResizeofIMG_3484.jpg
http://img.photobucket.com/albums/v225/tehdvd/ResizeofIMG_3482.jpg
http://img.photobucket.com/albums/v225/tehdvd/ResizeofIMG_3483.jpg

[Pepperoni]

Thanks guys! Just contact me and let me know what kind of setups you're looking into

dvdevo - im glad the bung placement worked out. Having it relocated was harder than i thought (took me 1.5hrs to complete that alone, lol) but in the end it doesnt matter as long as it came out right. thanks again

[dvdevo]

thanks for changing it back. maybe you should locate some 1 1/4 ID 90degree hoses and sell them with it =] Mine was totally ghetto

[iLL240SkiLLz]

The intake kits look great. Count me in for the :T25 Kit 1, with the stock bung size. [email protected]

-Victor

[s14slide]

payment sent via paypal

[iLL240SkiLLz]

payment sent!

[Pepperoni]

Everything shipped out thus far, thanks guys

[Dante319]

I gotta say I'm impressed with everything, I just got my pipe today, quality good, shipping good, and good customer service. I'll be posting a pic sometime on the weekend, once I install it.
Thanks Aure

[NiSmo240luvR]

just received my intake pipe today and it looks awesome. i was surprised to see you included the couplers and hose clamps too! cant wait to install this sucka. thanks Aure

[NekoPunch]

I received my intake pipe and installed it last weekend. Overall it's a nice unit and fitment was good. However, I had to do a bit of custom modification to make it work. Still, I think it was worth the money. Here are some pics...

http://www.northwestnissans.com/test/nekopunch/neko2/neko20-13.jpg

http://www.northwestnissans.com/test/nekopunch/neko2/neko20-14.jpg

http://www.northwestnissans.com/test/nekopunch/neko2/neko20-15.jpg

[Pepperoni]

All intakes shipped. Thanks for the reviews. Disco potato/gt2871r/etc. intake coming soon ;)

[Pepperoni]

T-Bolt clamps option added. I recommend you get them to reduce intake loosening/shifting during boost!

[95zilvia]

Still waiting on word for my intake.

[Pepperoni]

Still waiting on word for my intake.

I did reply to you, but you posted it in the wrong group buy thread.

Anyway, I just sent you a PM.

[5upra]

I'll be getting both your pieces in a bit...pm sent to you

[HalveBlue]

I bought both an intake pipe and hotpipe from Aure.

Both items arrived quickly and were as described.

I should note however, that the APEXi intake I have had a little bit of a fitment problem. Not a big deal, just kinda had to cram it in there.

Overall, I'm very satisfied with this product; especially considering the pricing and customization.

[Fat Felix]

you got PM !

[boosteds13]

Figured I would post a pic of it installed on a CA18DET motor--

Not the best pic, but it fits right in there (using an SR20 T25 turbo).
http://www.escic.com/CAinstall/ca-64.jpg

[Pepperoni]

Thanks guys, and thanks boosteds13 for the pic... good lookin swap

[oneslows14]

i need one for a sr20det s13...
Im using a q45 maf..
not to sure wich blow off im going to use probly hks...
can you make mine long maybe in 2 pieces so i can run in firewall?
Also i would be intrested in some itercooling pipes for my hybred ic..
thanks

?
[email protected]
please email asap realy want im in cali...riverise..
thanks

[oneslows14]

t25 for now..

[koontek]

Sent payment via paypal. cant wait to get it!

[wfeng]

nevermind.. edited..

[s13silvia123]

can you make an intake for for the garret gt2871r with a z32 maf. please send a pm

[Pepperoni]

can you make an intake for for the garret gt2871r with a z32 maf. please send a pm

Yes it's in my signature and listed in the group buy section.

http://www.zilvia.net/f/showthread.php?t=108930

[wfeng]

items received. great product and great seller whos willing to help, thank you!

[Pepperoni]

EDIT: resolved the problem. thanks

[Pepperoni]

Ok just to clear some things up for those of you confused:
http://img234.imageshack.us/img234/3615/t25intake8uq.jpg

This is a finished T25 intake pipe. Left bung sticking upward is for the BOV (1"). On the right you see a smaller bung (3/4") and that is for the catch can (stock size).

[Gramentz]

Sent a PM to you

[Pepperoni]

Thanks. Shipping out first thing tomorrow morning

[oneslows14]

hey we have been talking i need a complete set for my front mount. 3" on both sides coming from itercooler to 2.5 hot pipe and cold pipe and intake for q45 maf.. NEed complete set thanks
[email protected]
like the black top up in the pic set up...
thanks
jeff

[Pepperoni]

Ok i have plenty of piping available... 2", 2.5", 3"... in 45, 90, 180 degrees, for pretty much half the price of anywhere else, or i'll price match. Also have couplers available.

I might be working on a full bolt on FMIC group buy, but for now, those who want to go the custom route and get pipes for cheap can contact me.

[Gramentz]

Got the intake piping yesterday, looks awesome! Thanks again man!

[coldfire07]

Sent you an email (from coldfire07 at gmail dot com) asking about a bungless T25 intake a few days ago but haven't gotten a response back. Let me know if it didn't go through.

[fatboyevo]

i need one 2.. send me a pm. thanks

[NemeGuero]

Pics of the MAF thingy? Is it an adapter plate?

[email protected]

[TheTimanator]

pm sent! :bigok:

[My240]

is there any way that you'll make the intake tubing for the KA24 DET setup with a T3/T4 turbo?

[kouki3015]

please email me at [email protected] as I do not check forums often. I need a s14 sr20det hotpipe with hks flange and a s14 sr20det intake pipe. I am running HKS GT-RS turbo. T-28 outlet size. Thanks, please email me with total shipped to Rosemead, CA 91770

[kouki3015]

I am running Z32 MAF, SARD air filter, and Greddy oil catch can on the radiator support in front of the intake.

[Pepperoni]

Replied to all PMs... NemeGuero what "maf thingy" are you referring to?

my240 i replied to your pm, yes I can pretty much fab up any intake you need.

kouki3015, sending you an email soon

[NemeGuero]

NemeGuero is talking about the MAF adaptor plate..
It goes on the Z32 MAF to accomodate a 3" air filter...

[Pepperoni]

NemeGuero, sorry, I don't supply any adapters for air filters. The only things I supply are after the maf (couplers/coupler reducers for intake pipe or turbo inlet)

[nismostate]

NemeGuero is talking about the MAF adaptor plate..
It goes on the Z32 MAF to accomodate a 3" air filter...yo. check out ebay. i just bought one of those cheap ass air filters for like 15 shipped that came with an adaptor. friggin the adapter itself was worth the money.

pepperoni, you got pm about my intake pipe.

[NemeGuero]

I did have an ebay one.. it BROKE.
That's why I need a new one.

[Pepperoni]

Ok guys everything 99% back in stock, including all optional 90 degree couplers and hump hoses, tbolt clamps, etc. Get your orders in because this deal isn't going to last forever

[nissanguy13]

Aure is a great guy to do business with. I would recommend this intake piping to anyone with an sr. I put mine on back in dec. but due to leaving for iraq shortly after putting it on im just now getting around to putting some pics up.

http://i50.photobucket.com/albums/f311/sil240/IMG_0169-1.jpg

http://i50.photobucket.com/albums/f311/sil240/IMG_0171.jpg

http://i50.photobucket.com/albums/f311/sil240/IMG_0170.jpg

[Zero_SX]

this interests me
T25 Kit 1 with stock size bung and T-bolts please =)

[drifter808]

PM me the details on a kit #2 for t25. Also i hope shipping cost dont go up cause i live in hawaii(96743)lmk, Derek

[burgy240]

I'm interested in a t25 kit with stock recirculating inlet and stock SR MAF. I also want to know what it would take for you to fab me and s13 hot and cold pipe to match up to a Blitz FMIC on an s14 chassie? the pipes need to be for the S13 motor set up? Pm me with what else you would need from me and $$ thanks

[kernel]

I'd like to order an intake kit for T28 from you but i have a question first...

since i have a GT28R with T25 turbo inlet. My inlet is heading down toward the frame rail...does im gonna be able to bolt your intake still or id have to cut the inlet to make it head toward the front of engine ?

If you dont understand what i mean. Ill get pictures.

[Pepperoni]

PM'd everyone, as far as I know. Please PM me if you haven't heard back from me.

I'd like to order an intake kit for T28 from you but i have a question first...

since i have a GT28R with T25 turbo inlet. My inlet is heading down toward the frame rail...does im gonna be able to bolt your intake still or id have to cut the inlet to make it head toward the front of engine ?

If you dont understand what i mean. Ill get pictures.

Hi,
If you're using the stock T25 turbo inlet (not modified) then you will need the T25 style intake. You can send pics if you think it will help. Even if it is different than stock, I would rather mod the intake pipe rather than your turbo inlet. But from what it sounds like, T25 intake will best suit your needs. Please PM me to further discuss this/finalize the order.

[janders7]

I have the same setup as munkfu and have the downward pointing inlet as well.
email sent

[Pepperoni]

Thanks for the pics, janders7. It looks like the T25 setup will work best for your setup as well as munkfu's.

[Pepperoni]

Group buy isn't going to last forever guys, get your orders in.

We're now offering air filters over @ pipingpro.com If you need one along with your order, please contact me.

[1121S13]

ill buy the stock T25 intake pipe, if you guys ditch for this bling one.

[LA_phantom_240]

Damn.. how long will this be good? Im still raising money for my ca18... =( ... shouldnt be TOO much longer.. Maybe a couple months? If the offer goes out before i can get a swap, how much would it run me? No too much more i hope?

[Pepperoni]

1121S13: Please keep this thread specific to the group buy. There is a Wanting To Buy section.

LA_phanton_240: Not sure about the time left, but it won't be too much longer. These will always be offered at www.pipingpro.com but will be a bit more expensive since this is a Zilvia deal.

[Hersonevia]

I sent you a pm. I have a ca18det with a t28 on it. I want to rec. my bov. How much shipped?

[IKnowAllOfNothing]

Hey man
I want one of these intakes.
I would like one for map, recirculation, and catch can bung.
I’m running a greddy type s bov and stock t25 turbo

[ep510]

Looking for one to fit a GT28R on a CA18DET, with a Recirc bung ( 1 inch) and catch can return. (1/2 inch preferred)--need Z32 MAF adaptor as well

How much shipped to 12018? Paypal addy?

Thanks
DJ

[soawsome]

I want a t25 bungless pipe

how much shipped for the t25 bungless pipe. and who do i send payment to pm me with the details

[blitzer]

Hi,
i've an european 200sx lhd (s14a chassis, sr20det blacktop 5mt) and i'm interested in:
- s14 hotpipe with greddy type RS and wastegate bung
- s14 t28 intake pipe with bov recirculation bung

Tw0 questions:
1) I've an apexi power intake filter with induction box (fit more or less like the standard airbox), the intake pipe should work with it?
2) can you tell me shipping cost to Italy - Rome please?

My setup

http://xoomer.alice.it/blitz80/cars/Silvia/varie/t28_install_07


Another pics (ttp://xoomer.alice.it/blitz80/cars/Silvia/varie/t28_install_09)



Cheers
Adriano

[blitzer]

bump, is the gb closed?

[Pepperoni]

Nope it's still going. I'll be sending you a PM sometime soon!

[Adam496]

I am interested. I guess send me a pm to discuss and payment info.

[Eggdrop]

I want one of these. i have a s13 w t25 but will be getting a t28 in about a week. i will be using the inlet and outlet from the t25. what should i get. i want one with the catch bung.

[Pepperoni]

All PM's replied to. Please let me know if you haven't received a PM from me.

[sean350z]

thought i'd post a pic of the intake on a S14 with a S15 SR20

http://img475.imageshack.us/img475/120/intakehq9.jpg

[blitzer]

Pepperoni,
pm on the way for you (payment done) :wavey:

[misfitsfreak81]

pepperoni, i sent you a question via pm. im in need of the parts very soon. please reply. either email or pm will work. money in hand. thanks.

mike

[ComptonAssDaniel]

Hey, Pepperoni, I know you're busy--I sent you a PM, I think I put the wrong picture in it when I was using my example though. I need an intake pipe with the recirculation bung on it.

That, and I was wondering if you did intercooler piping at all. Thanks!!

[Adam496]

Payment Sent!

[KwKouki]

I will be sending payment for mine very soon.

[RalliartRsX]

email sent. Get back to me with your ideas.

Thanks, Chris

[Pepperoni]

Thank you to everyone who has ordered. Just a quick update: If you have not received your package yet, rest assured everyone's order is being shipped out daily this week. I appreciate everyone's patience. I am trying to catch up on PM's/emails, but right now I am putting more effort into seeing everyone's order be completed before I accept more orders, so please bare with me. If you have not heard back from me yet, I will be sure to get back with you very soon. Thank you!

[ComptonAssDaniel]

Oh, okay--let me know when you're accepting more orders. I'd like to get on that list...haha, thanks.

[anumeric]

I want to order one as well. Let us know when ou are starting to take more orders.

Thanks
Wei

[TUnity2]

sent you a PM, when you accept moe orderds, ill be ready.

[Kuzumi]

are you making intake pipes for GT2871R? if so i would like it with recirculating bung and z32 maf adapter

[Gorilla PimP]

actually would there be any chance that you can make a pipe that is 3 inch that will bolt up to the 2871R PM me please

[R33GTS-T]

out of curiosity, you got anything that will fit on an RB25 t3 in an s13???

- Daniel

[KwKouki]

I tried PMing you but I havent had a reply yet. I have a t28 on my s13 redtop. I need a hotpipe to accomodate the t28 in a s13, and intake. Lemme know if you can do this for me.

[meteorite_flo]

I tried PMing you but I havent had a reply yet. I have a t28 on my s13 redtop. I need a hotpipe to accomodate the t28 in a s13, and intake. Lemme know if you can do this for me.

he hasn't replied to me either. we'll just have to wait and be patient.

[Pepperoni]

WHEW! About 38 intakes got shipped out in the past few days:eek3d: We're all caught up on orders (except for maybe 2, which will shipped tomorrow). So we're ready to take new orders.

I apologize for not responding to your PM's quickly, but it's more important to me to get the current orders completed before taking orders that cannot be done within a reasonable timeframe. Hope you guys understand!

Oh, okay--let me know when you're accepting more orders. I'd like to get on that list...haha, thanks.

Just let me know what you need!

sent you a PM, when you accept moe orderds, ill be ready.

I'll check my PM box and reply as soon as possible

are you making intake pipes for GT2871R? if so i would like it with recirculating bung and z32 maf adapter

Yup, please click the link in my sig for more info!


actually would there be any chance that you can make a pipe that is 3 inch that will bolt up to the 2871R PM me please

Please click the link in my sig. All the GT2871R intakes are 3" aluminum to match the correct size of the turbo's inlet.

out of curiosity, you got anything that will fit on an RB25 t3 in an s13???

- Daniel

We've done a good amount of topmount turbo intakes- if you need one done, I can pretty much tell if it's doable once you send me a pic or two. But it shouldn't be much of a problem to fab one up for you.

I tried PMing you but I havent had a reply yet. I have a t28 on my s13 redtop. I need a hotpipe to accomodate the t28 in a s13, and intake. Lemme know if you can do this for me.

We have done a hybrid hotpipe and still working on the size issues (T28 outlet asks for a much shorter S13 hotpipe w/modified outlet). Once it is 100% complete and practiced, we'll put it up on www.pipingpro.com as another product.

Of course, doing this will cost a little more because of the labor, but it is doable. I'll look for your PM in my inbox and reply to you with more info.

he hasn't replied to me either. we'll just have to wait and be patient.

Yes thank you for being patient! I'll look for your PM and respond asap

[anumeric]

pepperoni sent ya a PM.

thanks
wei

[kris]

I pm'd you about an order i placed

[blitzer]

Pepperoni,
all things arrived in good nick, thank you.

Just for information (don't worry, i'll try to find a way by myself ) the pipes wound't fit in an Euro S14a w sr20det blacktop, the power steering bottle is exactly in the middle, for sure the pipes wouldn't fit with an apexi induction box neither with the original filter.......maybe with some 45° couplers in the middle to help.


Bye
Adriano

[jdms-14]

Hey, i e-mailed u like 3 days ago.... i can see that u are very busy and thats maybe why i havent got n answer yet... What i need is a t25 intake with the filter, but then i talked to my boy and he ask me to order one 4 him as well...
So it will be 2 t25 intakes, but only one with filter..
i can show u some pics sending then via e-mail bc they are too bog for this site
ps: its a S13 sr20 going into a S14

[Hersonevia]

I sent my money two days ago and I was wondering if when you ship it out I could be notified so I can be ready. Thanks

[DisFrikkenWill]

pm sent. let me know. thanks!

[RalliartRsX]

Pepperoni I pmed ya!! Let me know

And by the way guys, this guy gets tied up with orders, so sometimes he gets a bit busy and doesnt have much time to respond. Not to worry though, he will, just be patient;)

[burgy240]

Pm'ed you.:rawk:

[meteorite_flo]

yo aure!! your pm is full...

[nrg]

can you guys build something like this? hks/greddy knockoff:
http://image-cache.nissansilvia.com/forums/uploads/post-6940-1130564954.jpg
http://cgi.ebay.com/SR20DET-S14-S15-200SX-HARD-PIPE-INTAKE-KIT-SILVIA_W0QQitemZ250019809535QQihZ015QQcategoryZ438 08QQcmdZViewItem

[Realnez]

if you can do that price for Kit 2 -- Intake pipe with catch can bung and BOV recirculation bung: $70 shipped to canada let me know

thanks

[jdms-14]

PM ya last night... I need 2 kits! ;)

[FRpilot]

pm'ed you a few days ago peperoni.. are you filled with orders again?

[Hersonevia]

Do you have an update? I sent my money a couple of weeks ago and I havent gotten a respond. What is going on?

[pdqwrx]

I PM'd you last night......

Thanks
Scott

[rico05]

You gotta be REAL patient with him. He has gotten really back logged on these, but he will come through!! I had to send mine back to get it modified, and while it took a month to get back to me, but it was well worth the wait!!!!

[Hersonevia]

whats their phone number? I have some questions.

[jdms-14]

yo, i just wanna know if u got my PM, it was about two different kits that i need...
If u are busy i tottally understand, i dont want to put more pressure than what u alreaddy have...
just let me know bro
Blessings!:D

[kognition]

Looks like you have to hire some more help over there. :D
I was just about to order, but seeing all these guys paying and waiting, i don't want to overburden you.
Please PM me when you are not so backlogged, and i can place my order. Thanks,
Mike

[SDS13COUPE]

Yo Same Here. Send Me A Pm When Your All Situated.

[CRZY_AZN]

yea dude pm me too cuz i need a hot-pipe and intake.

[brainfood]

Im interested as well, let us know when you arent so backlogged.

[su177rit]

im interested.........i want both the hot pipe and intake combo.

[Creizai]

I'm ready to order, but I dont have to have it made and shipped out till the end of January 07.. pm me when you get a chance.

[TAMTANIUM]

AHHHH..he needs to hire someone to help him out with this business. I want an intake and hot pipe asap.

[Steve Lloyd]

I kinda want one before X-mas, anyone know how to get a hold of him?? I tried the contact through the web page, but no luck.

[FRpilot]

wondering the same thing.. been waiting 3 months for him to post on this thread when he's ready to take orders again..

[downshift_sideways]

I'm intrested too, I saw this awhile back, but I was n/a

PM me when you get back Aure!!

[domo dorigato]

yeah very intersted as well! let me knwo when things clear up

[ALEXTHESUS*PECT]

so the kit 1 for the t25 is direct replacement on a stock s13 sr20det?
do you still have these instock, and how much shipped to socal?

[origin_s135]

i'm also very interested. let me know when you're free.

[Crtan77]

Also interested shiped in socal. I have S13 red top with a S14 t28 I was wondering what type would you recomend for this set up. Also I dont need the bungs..

[kognition]

Wow,
I think he was abducted by aliens. What an incredible loss of business!
Holy hell!

[su177rit]

Wow,
I think he was abducted by aliens. What an incredible loss of business!
Holy hell!

I ordered mine 5 weeks ago from his website pipingpro.com, and still haven't receive it yet. I'm gonna try email them tonite and see what's up?

[origin_s135]

probally he wasssss abducted by aliens.

[Pepperoni]

Sorry guys, been really busy. To give an update: we have more staff in training now (which is what i've been busy with), and we got more welders in training as well (FINALLY!!!)

su177rit, if you didn't get my email, I basically said that if you receive the 1st (presumably lost) intake, keep it or recycle it; you should receive your 2nd intake any day now.

The group buy has been basically "over" for a while now, HOWEVER. I talked to my boss and I can still offer the same deal for Zilvians who didn't get in on the deal. So it's technically not over because I will keep this group buy thread open for a little while, and most likely get it moved to the Advertiser Specials and Sales area since these intakes/hotpipes will be regularly available at www.pipingpro.com

And please don't assume pipingpro.com is mine, because if you order through there, your order won't necessarily be done by me (unless you specifically request it to be done by me).

For now, If you're interested in an intake/hotpipe, it's probably best if you email me at my personal email: aurelianoislas at yahoo.com

We're also going to be offer a hybrid hotpipe. For those of you who replaced your T25 with a T28, but want to retain the T25 intercooler piping route, we will soon offer a T25/T28 hybrid hotpipe. Pictures will be given when everything is done. A GT2871R/T25 hotpipe hybrid is in the making as well.

T25 Cold Pipes are in the making and will also be offered very soon as well, with the same options as our current hotpipes (BOV flanges, wastegate bungs, etc.). We're still working on T28 Cold Pipes, since there seems be more variations on what piping route T28 user's take than T25's.

Thanks guys! (And no, I haven't seen any aliens yet!! ;))

[kognition]

So you are saying that you weren't abducted by aliens?
:keke:

Sorry guys, been really busy. To give an update: we have more staff in training now (which is what i've been busy with), and we got more welders in training as well (FINALLY!!!)

su177rit, if you didn't get my email, I basically said that if you receive the 1st (presumably lost) intake, keep it or recycle it; you should receive your 2nd intake any day now.

The group buy has been basically "over" for a while now, HOWEVER. I talked to my boss and I can still offer the same deal for Zilvians who didn't get in on the deal. So it's technically not over because I will keep this group buy thread open for a little while, and most likely get it moved to the Advertiser Specials and Sales area since these intakes/hotpipes will be regularly available at www.pipingpro.com

And please don't assume pipingpro.com is mine, because if you order through there, your order won't necessarily be done by me (unless you specifically request it to be done by me).

For now, If you're interested in an intake/hotpipe, it's probably best if you email me at my personal email: aurelianoislas at yahoo.com

We're also going to be offer a hybrid hotpipe. For those of you who replaced your T25 with a T28, but want to retain the T25 intercooler piping route, we will soon offer a T25/T28 hybrid hotpipe. Pictures will be given when everything is done. A GT2871R/T25 hotpipe hybrid is in the making as well.

T25 Cold Pipes are in the making and will also be offered very soon as well, with the same options as our current hotpipes (BOV flanges, wastegate bungs, etc.). We're still working on T28 Cold Pipes, since there seems be more variations on what piping route T28 user's take than T25's.

Thanks guys! (And no, I haven't seen any aliens yet!! ;))

[origin_s135]

LOL kognition! i wonder if the aliens gave him the PROBE. X_x lol just kidding aure. i'll PM you soon about the whistling pipes. : ) i mean intake pipes.

[s13.4kouki]

payment sent!

get that pipe out to me, i needs it!

[t67s13]

Sent you PM need t28 kit

[origin_s135]

payment sent! thanks.

[s13.4kouki]

big pimpin' and only 3 days turn around


thanks man, i might end up buying another one before long

[DoriftoPnoy]

Hey will this work for a GT2871R? Price? I wont be needing any bungs but I will be using a z32 maf. Thanks.

[Pepperoni]

Thanks again s13.4kouki. DoriftoPnoy, you will need a different style intake pipe which is offered at pipingpro.com as well, similar prices too. Check your PM box :)

[s14rgs]

I went to your site, paid for mine in full on 1-23-07, ive still not recieved it whats the hold up? I need this ASAP!

[s13silvia123]

i need a intake for the garret gt2540r i'm just wondering if you can make one asap. most come with couplings. the intake inlet coupling must be 4 inches reduce to the 3 in intake z32 with the coupling. the intake must have a bung for the oem catch can.

[FRpilot]

I went to your site, paid for mine in full on 1-23-07, ive still not recieved it whats the hold up? I need this ASAP!

seems like they are busy. i paypaled him also 1-29-07 but it says it can take up to 2 wks even though they're located within an hr from me in the bay area. but i requested a custom t25 pipe with no bungs at all so it might take time to weld shut and test. give it some time. they're busy.

[Pepperoni]

s14rgs yours has been shipped out already, and so has FRpilot's. s13silvia123, sending you a PM. Thanks

[LumXingXing]

any chance this will fit on the ka w/ a t25?

[Pepperoni]

any chance this will fit on the ka w/ a t25?

Yes, if you have a KA (or a CA) these intakes will still work, provided that you use the stock turbo inlet.

[Realnez]

need one with catch bung for t25 sr, get back to me

[Rittmeister]

Aure - sent a PM with some questions about making a pipe to work with an ARC intake box. Look forward to hearing back from you.

[s13silvia123]

aure payment sent. check your paypal and your pm

[Dr. Moreau]

pm'd

msglength

[ka24de-t]

I'm interested i need one with no bungs. please get back to me and let me know what i need to do. thanx.

[SDS13COUPE]

Payment sent on 2-09-07. Thanks Aure for the good deal. Can't wait to get it.

[statik]

I'm interested i need one with no bungs. please get back to me and let me know what i need to do. thanx.

Hes a busy guy, shoot him an email with what you need and he'll tell you a price and where to paypal. I got mine in ~1 week, good stuff.

[Pepperoni]

Thank you statik. Yes please send me an email. So far I've replied to all PM's thanks guys

[SDS13COUPE]

Hey Aure. Any word on my intake. I sent payment through the website and they said 2-5 days shipped. Just wondering whats up. Thanks, Amir

[s13silvia123]

aure any updates on my inatake your making yet. i would like to get pretty soon thanks man

[shundi]

Sent you a pm for no bunghole.....:keke: for a t25, and a reducer for the z32 maf.

[Pepperoni]

Check your emails guys for your shipment info. And i'm catching up on PM's so hang in there

[SDS13COUPE]

Got my intake. Good product. Bump for a good seller.