4sfed180
03-01-2006, 10:02 PM
hey guys,
i did some research with a buddy and found the correct size bolts to use for cam caps.
i put an order it to my boss at work for one complete set but i got 5 sets by accident.
i need to sell off the 4 remaining sets.
they are tested in my friends S13 that was making 452 at the wheels...reliably.
factory bolts are no good if you a couple of cam changes and start to stretch after two or three uses.
you will get:
10 short bolts for the inner holes
8 medium bolts for outer holes
2 long bolts for the oil tubes in the back of the head
the cost is $55 shipped.
send me an email if interstedto [email protected]
if you want to, you can call me for details: 847-682-1512
im in north chicago suburb (vernon hills)
Thanks,
Pavel
i did some research with a buddy and found the correct size bolts to use for cam caps.
i put an order it to my boss at work for one complete set but i got 5 sets by accident.
i need to sell off the 4 remaining sets.
they are tested in my friends S13 that was making 452 at the wheels...reliably.
factory bolts are no good if you a couple of cam changes and start to stretch after two or three uses.
you will get:
10 short bolts for the inner holes
8 medium bolts for outer holes
2 long bolts for the oil tubes in the back of the head
the cost is $55 shipped.
send me an email if interstedto [email protected]
if you want to, you can call me for details: 847-682-1512
im in north chicago suburb (vernon hills)
Thanks,
Pavel