need advice on nardi wheel install

[Boost Monkey]

so i bought a nardi wheel that came with the screw cover ring and a horn button. i already have a momo hub and i ordered a NRG gen 2 QR which should be here in a few days. my question is what bolts do i use to bolt the wheel to the NRG hub and be able to use the cover ring?

also, how do i hook up the horn so that it will work. on the momo steering wheel i have, theres 2 terminals, + and -, but on the nardi torino horn button, theres only 1 terminal. any help is greatly appreciated, thanks

[Ricks15]

I think the momo boss outta come with some extra hex bolts,but when you get the nrg hub thats going to come with some to, Is the NRG hub quick release and are you installing this you're self????? If youre tackleing this project you're self id suggest you dont waste you're time because its going to be a bitch getting the wheel to line up at the center when you're driving down the road the wheel isnt going to look right its going to be missaligned, Take all this stuff to a shop to install it inless you got a lot of patience, Post pics up of you're steering wheel when its installed.

[s13silvia03]

Like he said the NRG will come with bolts to mount that to the hub and then you just use the screws that came with momo hub to mount the Nardi wheel. Personally I would never pay a shop to install a steering wheel, I did both of mine in a few minutes, its not that hard to line up.

[Ricks15]

well thats good you were able to do it cuz I had a hard ass time doing it my self,

[DJPimpFlex]

I did mine in like 3 minutes. If you have to send this to a shop, turn in your tools, your done . .

[Ricks15]

yeah what ever you're just trying to show off:mad:

[s13silvia03]

I seriously don't see whats so hard about it that you would recommend taking it to a shop to installed...

[Chinoliro]

http://www.24ibuy.com/ftp/products/momo/InstallationHub.JPG
hope this helps

[i8yourfwd]

To get it straight, have your wheels straight when you take your stock wheel off.

Connect the QR to the steering wheel to the HUB. LOOSLY connect the QR to the hub. You can then hold the wheel and center it while you stick on the hub. Then take off the QR and tighten the bolt for the hub.

I did mine in like 3 minutes. If you have to send this to a shop, turn in your tools, your done .

[Boost Monkey]

i dont need a shop to do it haha...i already have a momo hub and steering wheel on my car. i am just swapping in a nardi with a nrg quick release (keeping the momo hub). i just needed to know what kind of bolts to use to hold the "bolt cover ring" on since the underside of the ring has 6 circles and not hex shapes.