PDA

View Full Version : FS: Lots of S14, KA, CA and AE86 parts


damesta
02-13-2006, 01:03 AM
---I am not parting out an S14, all I have is whats listed, please don't email me with random requests--

Heres what I have so far, all prices are OBO, email me at [email protected] with offers.


-S14 windshield washer fluid reservoir

-Manual tranny from 95 s14

-S14 MAF,Intake tube and box with new wix air filter

-S14 fan shroud

-S14 charcoal canister

-S14 manual shifter

-S14 27mm front sway bar

-S14 auto tranny

-s14 auto shifter assembly

-s14 auto driveshaft

-s14 auto tranny crossmember

-s14 auto ecu

-s14 auto control computer

-s14 manual stock clutch and pressure plate

-S14 Ka24de exhaust manifold heat shield

-2 S14 base model hubcaps

-zenk s14 driver side oem bumper light

-S14 KA AC system

-S14 KA AC compressor and bracket

-S14 KA PS pump and bracket

-S14 kA Alternator and bracket

-S14 KA Starter

-S14 KA Knock Sensor (brand new, used about 1 week until I swapped the motor out)

-S14 KA intake manifold with IACV, FICD and everything else thats attached to it

-S14 KA fuel rail with injectors and fpr

-S14 KA water neck with new thermostat

-S14 KA water pump pulley

-S14 KA engine mount brackets

-S14 KA throttle body

-93 Ka Cams, intake and exhaust, these are the more aggressive ones you can upgrade your s14 with

-Rebuilt ka24de head, never installed, just like new already assembled with everything but the cams-the head just had a stock rebuild, cleaned, checked to see if it was straight, valve seals were replaced, valve springs and valves were checked and replaced if out of spec.

-S14 radio pocket

-s14 passenger kick panel cover

-s14 driver side fuse box door

-S14 manual tranny cover plate

-Ca18det oem fpr in working condition

-Complete CA18DET pulley set(crank, alt, water pump, ps)

-oem CA18DET turbo extension/dump pipe

-S13 SR smic with recirculation valve

-stock s14 front calipers

-brand new s13/s14 4-lug front cross drilled/slotted rotors


Thats all I can think of right now, let me know if anyones interested.

2forty
02-13-2006, 01:25 AM
is that an s14 head or s13 head?

damesta
02-13-2006, 01:27 AM
The rebuilt head is from a 93.

m072514
02-14-2006, 04:58 PM
do you have an S14 shifter trim w/ boot by any chance? please PM me.

damesta
02-14-2006, 05:57 PM
No, thers a guy that sells brand new ones on ebay though, just bought one like a month ago.

damesta
02-19-2006, 01:15 PM
Added a few parts

krappy
02-19-2006, 04:16 PM
i need the plastic piece that goes around the radio... you got that?

damesta
02-19-2006, 04:49 PM
No, but you can get a new one for cheap, heres the link:

http://www.courtesyparts.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=CP&Product_Code=68260-S14CON

honduh
02-19-2006, 08:14 PM
i'm in need of an oil pressure sensor for a s14, you got one of those too?

AFSil80
02-19-2006, 08:23 PM
The CA pulley set, OEM or aftermarket?

damesta
02-19-2006, 09:14 PM
Oil pressure sensor got sold with the motor. I do have a working one from a CA though. It will fit and work fine with a KA, make me an offer if you want it.

The pulley set is oem, as far as I know no one makes an aftermarket pulley set for the CA. The aftermarket ones that I have on my car were a one-off set that were custom made.

BoogyManNN
02-20-2006, 03:34 AM
HOw much for -s14 driver side fuse box door and that whole piece that its on?? and visors if you have them

m0rex
02-20-2006, 03:37 AM
Do you have a driver side corner light?

damesta
02-20-2006, 09:50 AM
All I have is whats listed, I'm not parting out an s14.