Ok, so I bought some Enkei Mesh rims. 15x7 +0

[95zilvia]

And they don't fit on my car, wtf.
I tried to put them on, I swear they were 4x114.3 when I bought them.
And they don't fit.
And I tried to fit them on my friends EF Civic, and they don't fit.

When I tried to fit em on my car, they were like, 3 mm too small.

When I tried to fit em on my friends CIvic, they were like, 2 mm to big.

SO WTF. Is there such thing as 4x112!>?!?!?! WTF IM GOING CRAZY

These are 15x7 +0 Enkei Mesh, I'm sure you guys all know how they look.

I'm sad :(

[OMGWTFBBQ]

goddamn novelty practical joke wheels
always changing their bolt pattern

[sw20>>s14]

ive checked some meshies out that were 4x108 before...measure the p.c.d...good thing i measured them there...

[95zilvia]

Wtfffffffffff..

[ALTRNTV]

Measure them, as sw20>>s14 said. I'm sure you checked the back of the rim, but if you didn't, now would be a good time.

[!Zar!]

Arn't those off of a bimmer, and other german cars alike...

[FaLKoN240]

4x112 I believe is 4 lug Mustang pattern. I believe the 1st gen RX7s have a crazy bolt pattern like that as well.

You should either
A. try to return them.
B. Take them to a wheel shop to get them redrilled.
C. Throw them away.

[kazuo]

Mustangs have like 4x112... older RX7 uses 4x108... and Bimmers use some other weird 4 lug pattern.

Basically, you be fucked

Sell 'em on craigslist.

[theicecreamdan]

you can get some wheels redrilled, meatish just made a thread about it. it took him a lot of trips to a lot of machine shops to find a place that was comfortable to do it. But it can be done

[95zilvia]

I'll sell em on Craigslist :P
First I gotta measure the PCD first dangit.

I was super lookin forward to rollin on these with my daily, I even painted them Safety Cone orange :( WAAAH :(

[Ritz S14]

Hey FOOO.. They're probably 4x111... Which are first gen Rx7s bolt pattern.

[2iv0 sx]

post pictures of em...

[95zilvia]

http://i11.photobucket.com/albums/a195/onathan525/DSC00181.jpg
http://i11.photobucket.com/albums/a195/onathan525/DSC00192.jpg

[OMGWTFBBQ]

dang
hella clean haha

[sw20>>s14]

did you measure them yet? im curious to know myself...

[reflexdb]

where'd you buy em from? i remember some like that being sold on here. (not orange though)

[95zilvia]

I got them from Dorris Auto junkyard in Hayward.
Haven't measured them yet!

[DeBastaard]

You could get them to a machine shop and have them redrilled to 4x114.3 ??

A Friend of mine did the same with his wheels, came off a Lexus and he got hem redrilled to the correct PCD.

[sw20>>s14]

lexus/toyota have the same pcd as nissans...just different hub bores...unless if your friend doesnt have a nissan and im just assuming =)

[DeBastaard]

Could be that i'm slightly mistaking about his friend having a lexus...

My 'friend' has a Sil80, 4x114.3

Anyway he got them redrilled from 4x112 something to 114.3