PDA

View Full Version : Throwin codes!


Exille
02-05-2006, 08:37 PM
Well, ijust now checked my ecu, and it threw 11 and 34, which to my understanding is the knock andcam sensors? how would i go about diagnosing this? i also did the mode 1 malfunction check, and the bulb stayed on which according to the faq i went by (NICO) it means theres something wrong with my crank angle sensor...what do i do?

Exille
02-06-2006, 02:47 PM
so noone knows?

MELLO*SOS
02-06-2006, 03:26 PM
I had that code 34 on my s13 KA24DE. Turned out that the knock sensor itself was fine, but the wiring going to the sensor was bad & it was shorting. This caused the car to have a serious lack of power in the midrange and was really annoying.

There are various ways to diagnose the code 34. One thing to do is to measure the resistance of the KS wiring from the ECU to the various sub-harness connectors. It should be very very low and non-fluctuating on your DMM, otherwise you probably have a short somewhere. Search my threads for 'bog' and you'll find a thread with some more info on the code 34.

GL troubleshooting your problems