PDA

View Full Version : FS: liquidation of nissan parts


speedtuningnews
02-04-2006, 12:48 PM
Ok here is the deal. I have closed my small shop i had and am selling off all the unused parts from my projects. I do have other parts still available but i am adhearing to the guidelines for the forum. Here is a list of what i still have. I had posted for some time and sold quite a few things on midatlantic240sx with permission but the site keeps going down and i need to sell this stuff.

94 KA24DE Engine 107k runs fine $ 375.00

94KA24DE Auto trans under 100k $ 300.00 ran fine SR swap car

92 KA24DE Parts Engine $ 175.00 comlete minus a few very small parts and distributor. ran fine but needs timing chain

90 S13 5 speed trans 141K miles $ 150.00 + 3 other trans as well

stock fenders - make offer or call conditions vary

stock doors - make offer or call conditions vary

bumpers front or rear - make offer or call conditions vary

APEXi N1 s13 exhaust new on display only never mounted on a car $325.00

TARMAC protoype S13 3" stainless steel exhaust new never mounted $200.00

Actual Cwest 180sx front bumper new been sitting around for a year $ 200.00
Enkei NT03M 18 x 8.5 and 18 x 10.5 wheels ( 5 bolt) have tires mounted but havent been on the road. BFG KD (sticky) radials 235 front and 285 rear $ 1700.00 for all 38mm offset front and 30mm offset rear

XS POWER T3/T4 turbo used for a week car was crashed still fine $120.00

Buddy Club Racing Spec coilovers s13 with pillow ball mounts mounted on car but car has not moved out of showroom since. $1000.00 shipped

RB20DET engine / trans / wiring into S13 / ecu / crossmember engine has 35k on it asking $1700.00 comes with extra front crossmember, spare cam sensor, ignitor, valve covers, flywheel, clutch assembly and stainless tubular manifold.

KA24E cylinder head bare good to port one or as a spare $50.00

there is more stuff but i have to go look again. i think i have a nismo copy front end, and some other stuff but i gotta go look. I also have parted out over 7 240's and have many parts left. email or pm me with anything you need.

closed shop and will be moving soon..

thanks

I am in PA

www.speedtuningnews.com

speedtuningnews
02-05-2006, 07:29 AM
bumper can be seen at www.solid-performance.com under used parts....pm's will be sent as well.

thanks

ericherm1
02-05-2006, 10:09 AM
Can you post a pic of the Apexi and TARMAC exhausts? Also do they come with the silencer insert?

meangreen240
02-05-2006, 10:36 AM
what condition is the drivers door in?

meangreen240
02-05-2006, 10:36 AM
what condition is the drivers door in?

djb
02-05-2006, 12:25 PM
would you ship the bumper to canada? if so how much?
cheers

jdm_s14_zenki
02-05-2006, 01:41 PM
how much for turbo shipped to 92801, do u also have the manifold for this? Let me know

speedtuningnews
02-05-2006, 01:44 PM
shipping to you for the turbo would be approx 24.00 and i would ship to canada for the bumper but it would be really really expensive where in canada are you maybe you should come get it....

thanks

djb
02-05-2006, 01:48 PM
vancouver bc...west coast. if you could get me a really ballpark guess even that'd be good..

speedtuningnews
02-05-2006, 02:14 PM
alot of the used items are on a link on the top left ofthe page under used items from forum on www.solid-performance.com

thanks
the doors i need to take a few photos of and will post as well.

Juujai
02-05-2006, 02:22 PM
how much for the exhaust shipped to 91770 email me back at [email protected] thanks

ReLevent1
02-05-2006, 04:03 PM
Pm me how much shipped to 95624(priced separately) for the:
Cwest Bumper, 92 Parts motor, and turbo ?

speedgod^s13
02-05-2006, 04:54 PM
How's the spool time, on the xs turbo? Also, some specs would be nice, and how much would shipping to 96816, be?

BSPerformance
02-05-2006, 05:29 PM
where in pa are you? have any pics of the turbo?

TheSparo
02-05-2006, 05:37 PM
yea, specs on the turbo... there are tons of t3/t4's....

speedtuningnews
02-05-2006, 09:03 PM
its a T3 flange
3" inlet

50 A/R COMPRESSOR

.63 A/R TURBINE

.57 TRIM

will have photos on www.solid-performance.com tomorrow check out our new stuff

thanks

www.speedtuningnews.com
www.solid-performance.com

xnyc
02-05-2006, 09:33 PM
looking for fenders. how much you looking for shipped to 11355 and where are you located? im in ny so if not too far i might pick up

djb
02-06-2006, 01:22 AM
so i guess thats a no on shipping to bc?

RB26Sileighty
02-06-2006, 01:29 AM
do you have after market torque arms, tension arms, tie rod ends , and etc..

speedtuningnews
02-06-2006, 08:06 AM
shipping to bc was like 165.00 on the one quote and the other hasnt got back to me yet...... i just was waiting to hear before posting so i could post both.

thanks

speedtuningnews
02-06-2006, 08:18 AM
they are going to be part of a intro group buy and yes will be available very soon as well as the coilovers which will be on a special intro buy...... waiting for the freight quote to air fright them into the US for the first few orders..... i dont want to get in trouble on here as I am just starting out with this. Some people know my story with my past and the medical problems and understand but alot of you on here dont. I dont want to make people mad by posting new product info... but look at my site and register in the speedtuningnews forum and pm tarmac. Aww heck OK here goes. We are looking for potential sponsor cars,drift cars and dealers. Check out the webpage and let me know.

napoleon
02-06-2006, 11:43 AM
sent an email through your site with parts i would like to buy..i will rephrase here.
I would like the font bumber, exhaust and turbo you have for sell and some parts off the wrecked cars.It would be easier for you to respond to that message.

djb
02-07-2006, 03:00 AM
alright 165 isnt too bad. if you could do 340 shipped id most likely be game.

twofocused
02-07-2006, 09:59 AM
I think I want that Tarmac exhaust. If you could sent me a photo of it mounted on the car, I could Paypal you asap. Located in NC, need a quote on shipping.

speedtuningnews
02-07-2006, 10:03 AM
tarmac exhaust sold but i will be posting a deal on the real tarmac exhaust finished product over at www.speedtuningnews.com go register so you will automatically get updates on the coilover intro buy, the exhaust and manifold intro buy. once we do the intro buy, you will have to buy from a dealer or meet us at a time attack event where we will do limited selling of display models.....

thanks
dan

IketaniS13
02-07-2006, 01:58 PM
How much for the fenders shipped to 33467. Very interested

speedtuningnews
02-07-2006, 07:03 PM
posted from ka-t.org under for sale....
-------------------------------------------------


Joined: 07 Feb 2006
Posts: 1


PostPosted: Tue Feb 07, 2006 1:32 pm Post subject: Tarmac Exhasust Reply with quote
Bro's

Just received the Tarmac exhasust and can I only tell you guys how good it looks and sounds. This may be a prototype but the quality is great. Came with all the hardware and mounted in about 20 mins you know how those cat bolts can be. Honestly this is a $600 + full exshaust for $200

I will try and get pics posted tomoorrow after i clean the rest of the car.

this is a great deal and Dan is the one of the most responsive sellers i have dealt with payed for item and had it next day Smile

will get freight quote for fenders...

thanks

dan

www.speedtuningnews.com


thx

napoleon
02-07-2006, 08:54 PM
so i guess that you let me order the exhaust of your site when it was already sold....

speedtuningnews
02-08-2006, 09:03 AM
nope i have two... yours is being processed....

will be in touch today

thanks
dan

there are no more tarmac prototype exhausts available at this point...

napoleon
02-08-2006, 11:18 AM
sweet..look foward to hearing from you!