PDA

View Full Version : Safe boost level for my set up?


jlinder
01-29-2006, 11:05 PM
Hello, new guy here. I have been reading over alot of different post that are asking about safe boost levels. But I can not find any that have my current set up. Any help would be great, Thanks

94 S13 SR20DET Black Top
Big 28 Turbo
255 lph fuel pump
FMIC
370cc inj.
3" down pipe
HKS BOV
KOYO/FAL 210 (for cooling)

P.S. I would like to thank everybody for the endless amount of info. that has been entered on this forum. It has help me out alot during my swap.

Josh

DrtyRat
01-30-2006, 06:43 AM
did a little search for you (key words:s13 t28 boost) and came up w/this...
http://www.zilvia.net/f/showthread.php?t=63365&highlight=s13+t28+boost
not the exact same setup but pretty close...gl...btw what part of fla.?

jlinder
01-30-2006, 09:28 AM
Thank you for the reply.
I am located near the Space Center (cocoa area):wavey:

SPOOLDU
01-31-2006, 09:18 AM
I wouldn't recommend you boost anything over 8-10lbs (or whatever the wastegate permits) because you'll need some type fuel management to ensure you're acquiring proper A/F ratios. Theoretic results aren't exact and thus permit no excuse to "guess" or "try" different boost levels-period, unless you want to risk damaging your motor. What type of fuel management do you have, if any? Also, you'll need larger injectors (550cc if you run 93 and 650cc if you are stuck with 91 like me) to help aid in reaching those higher boost levels safely.