will an s13 ka24de go into an s14?

[nismo tuned s14]

i have an s14 with a blown engine and a s13 ka24de. i want to put the ka in the s14 but i was looking and there are a couple of things that are different (like the distributor for example has 2 plugs on it while the s13 only has one. i need to know what all is involved if it is possible to do this swap. thanks.

[punxva]

yes it will, you will need to use the existing harness from the s14, the dist. the stock Cat., ECU, and a few other pieces that i'm not 100% sure on.

[h3x11]

i have done this before...it's actually very simple.

do this and it make your life so much easier.

pull the s14 motor, and swap the intake manifold, distributor, etc to the s13 motor and drop it back into the 240sx and you don't even need to do any wiring. some sensors are the same. you're basically just swaping the block, get the idea!!!!

[nismo tuned s14]

thanks for the replies. i start this swap today so i will definately post my problems if i have any!

[drift925]

good luck with that man