PDA

View Full Version : S13 B Pillar bar/Harness bar


PANGES
01-27-2006, 05:56 PM
Does anyone make one? I really want one but can't find one... I'm too poor to get a roll cage. lol.

TAMTANIUM
01-27-2006, 06:05 PM
sparco does

http://www.sparcousa.com/harness_bars.asp

very expensive tho.

SochBAT
01-27-2006, 07:12 PM
Thats like, a OneHitKill cheatcode for 240s!

Lets DYING!!!

sideview_180sx
01-27-2006, 10:32 PM
No one makes one because there isn't really a market. Not too mention in regards to S13s automatic seatbelts don't help when body paneling covers the would be bolt holes for traditional safety restraints. For an S14 the same thing applies to not having a big enough demand for them to be produced. You would probably be better off getting an autopower 4-point bolt in cage.

Wei240
01-27-2006, 10:49 PM
go to home depot and make one yourself...

(really, just get a roll cage...)

TAMTANIUM
01-28-2006, 12:16 AM
go to home depot and make one yourself...

(really, just get a roll cage...)

I hope he's just kidding with you...DON'T!! make your own harness bar! It's the only thing that is holding you, if an accident happen. Just save up and get a roll cage :)

180InProgress
01-28-2006, 01:00 AM
Hey man, maybe this helps... I found somehting you might want here: http://www.enjukuracing.com/ I'd give you the exact link but it won't work... so just go to enjukuracing's website and click on the used/clearance link and scroll down. Mazworx harness bars specifically made for the 240

http://www.enjukuracing.com/

I wish I had the cash to get it myself.

inthered
01-28-2006, 01:06 AM
Megan Racing makes one for the S13. It's universal, since it also fits the AE86 and another car that I forget atm.

PANGES
01-28-2006, 02:27 AM
yeah ok.. when I really think about it... it IS kinda stupid. lol. I guess i'll save up for my roll cage. I got my C Pillar bar and that floor bar thing today though. I dont really see anything for the floor bar that goes on the floor behind the drivers seat to bolt onto though...? I was looking for a bolt for the bottom of my seatbelt, but it seems like there's only 1 bolt there and the carpet is covering it up... Also, where do you get the autopower cages?

sideview_180sx
01-28-2006, 03:46 AM
http://www.ioportracing.com/Merchant2/merchant.mv?Screen=CTGY&Store_Code=IPRS&Category_Code=AP670

andrewmp6
01-28-2006, 03:51 AM
if you wanna loose the auto seat belts take a look at http://www.pandagarage.com/

i8yourfwd
01-28-2006, 05:26 AM
WOW $220? Or you could go to the junkyard and get 200sx belts. $20, DONE

HyperTek
01-28-2006, 12:15 PM
make one.. its not hard. Id do it like this.
http://myspace-551.vo.llnwd.net/00281/15/59/281469551_l.jpg

Bracing the b-pillars is stupid tho imo, like everyone states above, it is a caution, becuase anything can happn.

nsn240
01-28-2006, 06:10 PM
make one.. its not hard. Id do it like this.


Bracing the b-pillars is stupid tho imo, like everyone states above, it is a caution, becuase anything can happn.

more info? you just have them bolted into the rear seatbelt points?

sideview_180sx
01-28-2006, 08:03 PM
harnesses mounted in that fashion are very prone to having the belts stretch in the event of a collision. altho it is a cheap way to have some form of restraint. However why would you cheap out on safety...

PANGES
01-28-2006, 09:35 PM
harnesses mounted in that fashion are very prone to having the belts stretch in the event of a collision. altho it is a cheap way to have some form of restraint. However why would you cheap out on safety...

Agreed. I got my floor bar thingy in and my C pillar bar in this morning.. Seems like the C pillar was JUST long enough... the screws were practically unbolted though... LAME fitment from ebay but o well.

andrewmp6
01-28-2006, 11:50 PM
sideview is right why do somthing wrong and knowing it could hurt you if your not gonna install them right then dont buy them

i8yourfwd
01-29-2006, 02:32 AM
Agreed. I got my floor bar thingy in and my C pillar bar in this morning.. Seems like the C pillar was JUST long enough... the screws were practically unbolted though... LAME fitment from ebay but o well.
You coulda just made your own Cpillar bar for like $10 :P Thats what a few friends and I did.

Nan Desu Ka?!
01-29-2006, 11:08 PM
yay for making your own cpillar bars!

DONT SKIMP on safty, for fuck's sake... just pay the 350 for the autopower roll/harness bar. its one of the ONLY safe ways to intregrate harnesses into our cars without the change of compressing you spine/neck/head in the even of a roll-over.

lets compressing our spine!

PANGES
01-29-2006, 11:14 PM
yay for making your own cpillar bars!

DONT SKIMP on safty, for fuck's sake... just pay the 350 for the autopower roll/harness bar. its one of the ONLY safe ways to intregrate harnesses into our cars without the change of compressing you spine/neck/head in the even of a roll-over.

lets compressing our spine!

where do u get them at?

FlatDrftCJS
01-29-2006, 11:47 PM
dude if you want you can see all of the bracing I have in my s13. Let me know when cuz I'm not driving it right now. Having a roll cage in the city is like asking for a fix it ticket. Sometimes cops will pull you over for the smallest thing. BTW I have a c pillar bar and a harness bar.

that180guy
01-29-2006, 11:57 PM
dooood. 265 from ioport, 4 point street bar. then find sum go to shop n hav a harness bar welded on. cheappp.
or go the easier way with that autopower removeable one(which eh...imho i rather have one welded in)

PANGES
01-30-2006, 06:41 PM
dooood. 265 from ioport, 4 point street bar. then find sum go to shop n hav a harness bar welded on. cheappp.
or go the easier way with that autopower removeable one(which eh...imho i rather have one welded in)

lol. Where do u get the autopower ones tho?

i8yourfwd
01-31-2006, 03:58 AM
265 from ioport. He said that already :| Link is up there also...

http://www.ioportracing.com/Merchant2/merchant.mv?Screen=CTGY&Store_Code=IPRS&Category_Code=AP670